prikaz prve stranice dokumenta Pločasti - člankasti transporter
Access restricted to students and staff of home institution
master's thesis
Pločasti - člankasti transporter
Rijeka: University of Rijeka, Faculty of Engineering, 2018. urn:nbn:hr:190:911742
Slaviček, Luka
University of Rijeka
Faculty of Engineering
Department of Mechanical Engineering Design
Section of Power Transmission and Industrial Transport Equipment and Devices

Institutional repository: Repository of the University of Rijeka, Faculty of Engineering

Cite this document

Slaviček, L. (2018). Pločasti - člankasti transporter (Master's thesis). Rijeka: University of Rijeka, Faculty of Engineering. Retrieved from https://urn.nsk.hr/urn:nbn:hr:190:911742

Slaviček, Luka. "Pločasti - člankasti transporter." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:911742

Slaviček, Luka. "Pločasti - člankasti transporter." Master's thesis, University of Rijeka, Faculty of Engineering, 2018. https://urn.nsk.hr/urn:nbn:hr:190:911742

Slaviček, L. (2018). 'Pločasti - člankasti transporter', Master's thesis, University of Rijeka, Faculty of Engineering, accessed 28 August 2024, https://urn.nsk.hr/urn:nbn:hr:190:911742

Slaviček L. Pločasti - člankasti transporter [Master's thesis]. Rijeka: University of Rijeka, Faculty of Engineering; 2018 [cited 2024 August 28] Available at: https://urn.nsk.hr/urn:nbn:hr:190:911742

L. Slaviček, "Pločasti - člankasti transporter", Master's thesis, University of Rijeka, Faculty of Engineering, Rijeka, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:190:911742

Metadata
TitlePločasti - člankasti transporter
Title (english)Apron conveyor
AuthorLuka Slaviček
MentorNeven Lovrin (mentor)
MentorŽeljko Vrcan (mentor)
Committee memberKristian Lenić (predsjednik povjerenstva)
Committee memberNeven Lovrin (član povjerenstva)
Committee memberKristina Marković (član povjerenstva)
Committee memberDario Iljkić (član povjerenstva)
GranterUniversity of Rijeka
Faculty of Engineering
(Department of Mechanical Engineering Design)
(Section of Power Transmission and Industrial Transport Equipment and Devices)
Rijeka
Defense date and country2018-07-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu zadatak je bio konstruirati pločasto – člankasti transporter za transport otpada. Pločasto – člankasti transporteri spadaju u grupu sustava s neprestanim transportom različitih vrsta materijala. Za konstrukciju transportera su korišteni standardni konstrukcijski elementi. Drugo poglavlje ukratko opisuje povijesni razvoj transporta, te vrste transporta koji se dijele na neprestani i povremeni. Treće poglavlje opisuje najčešće upotrebljavane sustave neprestanog transporta, a to su trakasti transporteri. U četvrtom poglavlju prikazujemo konstrukciju člankastih transportera te njihove prednosti i nedostaci. Usporedbom trakastih i člankastih transportera zaključujemo da svaki imaju neke nedostatke, te krećemo sa proračunom transportera koji će sadržavati prednosti i trakastih i člankastih transportera. U petom poglavlju, koje je i najopširnije, je objašnjen tijek proračuna svih dijelova transportera na temelju kojeg se određuje nosiva konstrukcija, odabir standardnih dijelova te konstruiranje nestandardnih dijelova.
Abstract (english)
The aim of this final paper is to design an apron conveyor for the transport of municipal waste. Apron conveyors belong to the system group of ongoing transport of various kinds of materials. Standard off the shelf elements were used for the conveyor design. The second chapter briefly describes the historical development of conveyors and the types of transport which are divided into perpetual and intermittent. The third chapeter describes the most frequently used systems of perpetual transport, which are belt conveyors. The fourth chapter deals with the design of apron conveyors and their advantages and disadvantages. From the applications of belt and apron conveyors, we can conclude that each of them has some downsides. In addition, we begin with the calculation of a conveyor that will contain the advantages of both belt and apron conveyors. In the final chapter the course of calculation of all the parts of the conveyor, upon which the main design, choice of standard parts and design of non – standard parts are based.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:190:911742
Study programmeTitle: Mechanical Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-07-20 08:36:34