prikaz prve stranice dokumenta RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA
Access restricted to students and staff of home institution
undergraduate thesis
RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:194722
Blažević, Toni
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Blažević, T. (2020). RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:194722

Blažević, Toni. "RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:194722

Blažević, Toni. "RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:194722

Blažević, T. (2020). 'RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 29 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:194722

Blažević T. RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 December 29] Available at: https://urn.nsk.hr/urn:nbn:hr:153:194722

T. Blažević, "RAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:194722

Metadata
TitleRAČUNALNI PROGRAMI ZA OPTIMIRANJE TEMELJENI NA MATRICAMA
Title (english)MATRIX-BASED COMPUTER PROGRAMS FOR OPTIMIZATION
AuthorToni Blažević
MentorKatica Šimunović (mentor)
Committee memberKatica Šimunović (član povjerenstva)
Committee memberIlija Svalina (član povjerenstva)
Committee memberSara Havrlišan (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom završnom radu prikazano je rješavanje problema linearnog programiranja pomoću računalnih programa za optimiranje temeljenih na matricama od kojih su odabrani programi GNU Octave, Scilab i MATLAB. U uvodnom dijelu pojašnjena su sučelja i primjena odabranih programa te određeni pojmovi vezani za linearno programiranje i odabrane programe. U idućim poglavljima definirani su proizvodni problemi prema problemima s kojima se susreću inženjeri u stvarnoj praksi te je prikazano rješavanje definiranih problema u odabranim programima. U poglavljima je objašnjena i sintaksa te funkcije pomoću kojih se problemi rješavaju. U šestom poglavlju uspoređena su dobivena rješenja za definirane proizvodne probleme te su u zaključku objašnjene glavne razlike i pomoć pri odabiru programa.
Abstract (english)
In this bachelor thesis, solving the linear programming problems using matrix-based computer programs for optimization was shown. Computer programs chosen were GNU Octave, Scilab and MATLAB. In introduction part, program interfaces, program application, and certain terms associated with linear programming and optimization were described. In the following chapters, linear optimization problems based on real life production problems that engineers face were defined and solved using GNU Octave, Scilab and MATLAB. In those chapters, program syntax was explained with functions solving the linear optimization problems. In chapter six, problem solutions for defined problems were compared. Chapter seven is conclusion in which program differences were explained with help in choosing a program based on users needs.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:194722
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-10-08 12:40:14