prikaz prve stranice dokumenta TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001
Access restricted to students and staff of home institution
undergraduate thesis
TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:508140
Ivanković, Ivan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Ivanković, I. (2020). TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:508140

Ivanković, Ivan. "TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:508140

Ivanković, Ivan. "TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:508140

Ivanković, I. (2020). 'TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:508140

Ivanković I. TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:508140

I. Ivanković, "TEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:508140

Metadata
TitleTEHNOLOGIJA IZRADE DIJELA PREMA CRTEŽU II-001
Title (english)TECHNOLOGY OF MAKING A PART ACCORDING TO DRAWING II-001
AuthorIvan Ivanković
MentorMiroslav Duspara (mentor)
Committee memberMiroslav Duspara (član povjerenstva)
Committee memberAntun Stoić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom dijelu ukratko je opisana tehnologija obrade odvajanja čestica i napravljena njezina podjela. U daljnjem dijelu je opisan početni proizvod i objašnjen odabir materijala od kojeg će se proizvod izraditi. Također je opisan postupak tokarenja, njegova podjela i podjela tokarilica i tokarskih noževa. Opisan je postupak glodanja i objašnjeni su najčešći postupci obrade glodanjem kao i podjela alatnih strojeva glodalica, te je opisan završni postupak obrade, poliranje. Nakon toga je prikazan postupak same izradbe proizvoda uz odgovarajuće fotografije alata i strojeva koji su se koristili. U zadnjem poglavlju je napisan zaključak završnog rada.
Abstract (english)
The introduction part of this paper briefly describes technology of particle seperation processing and its division.Furthermore in paper is described inital product and explained choice of material for the product. Also there is description of the turning process, his division, division of lathes and its tools. The milling process is described and his most common processes, as well as the division of milling machines and also final process, polishing. After that there is shown process of making the product with appropriate photos of tools and machines that were used. In the last chapter is written the conclusion of this work.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:508140
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-10-09 10:58:44