prikaz prve stranice dokumenta PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA
Access restricted to students and staff of home institution
undergraduate thesis
PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:764300
Putnik, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Putnik, M. (2020). PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:764300

Putnik, Marko. "PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:764300

Putnik, Marko. "PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:764300

Putnik, M. (2020). 'PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:764300

Putnik M. PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:764300

M. Putnik, "PRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:764300

Metadata
TitlePRIMJENA NOVIH TEHNOLOGIJA U PROCESIMA PROJEKTIRANJA TEHNOLOGIJE ZAVARIVANJA I PRAĆENJA PROCESA ZAVARIVANJA
Title (english)PREPARATION ON-LINE MONITORING COMPUTER PROGRAM FOR MEASUREMENT, COLLECTION AND ANALYSIS OF MAIN WELDING PARAMETERS
AuthorMarko Putnik
MentorMarko Dunđer (mentor)
MentorIvan Samardžić (komentor)
Committee memberMarko Dunđer (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
Committee memberDejan Marić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je obrađena tema korištenja on-line monitoring uređaja za praćenje, prikupljanje i analizu glavnih parametara zavarivanja kod elektrolučnog postupka zavarivanja taljenjem. Poseban naglasak je stavljen na CMT proces zavarivanja gdje je opisan proces rada, njegove prednosti i nedostaci, ograničenja u CMT procesu, te njegova primjena. U prvom dijelu je definirano što je zavarivanje te su opisani elektrolučni postupci zavarivanja taljenjem a to su REL, MAG, MIG i TIG postupci i opisan je on-line monitoring glavnih parametara zavarivanja. U drugom dijelu je opisan CMT proces zavarivanja, njegove prednosti i nedostaci. Zatim je prikazana i strujno naponska karakteristika, te je opisano gdje se koristi CMT proces zavarivanja, trenutno najaktualniji je WAAM proces zavarivanja poznat kao 3D ispis. Opisan je uređaj Fronius TPS 400i i traka Flextrack 45 Pro koji se nalazi u laboratoriju za zavarivanje na Strojarskom fakultetu.
Abstract (english)
The paper deals with the topic of using online monitoring of devices for monitoring, collection and analysis of the main welding parameters in the arc fusion welding process. Special emphasis is placed on the CMT welding process where the work process, its possibilities and disadvantages, the limitation in the CMT process, and its application are described. The first part defines what is described by electronic fusion welding processes and they are REL, MAG, MIG and TIG processes and describes the on-line monitoring of the main welding parameters. The second part describes the CMT welding process, its advantages and disadvantages. Then are shown the current-voltage characteristics of CMT, there is described where the CMT welding process is used, currently the most acute is the WAAM welding process known as 3D printing. It's described by a device Fronius TPS 400i and Flextrack 45 Pro rails used in the welding laboratory at the Mechanical Engineering Faculty.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:764300
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-10-12 07:19:47