prikaz prve stranice dokumenta KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA
Access restricted to students and staff of home institution
master's thesis
KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:364530
Bošnjaković, Josip
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Bošnjaković, J. (2020). KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:364530

Bošnjaković, Josip. "KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:364530

Bošnjaković, Josip. "KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:364530

Bošnjaković, J. (2020). 'KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:364530

Bošnjaković J. KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:364530

J. Bošnjaković, "KORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:364530

Metadata
TitleKORIŠTENJE PODMODELIRANJA U NUMERIČKIM PRORAČUNIMA
Title (english)USING OF SUBMODELING IN NUMERICAL CALCULATIONS
AuthorJosip Bošnjaković
MentorDarko Damjanović (mentor)
Committee memberDarko Damjanović (član povjerenstva)
Committee memberPejo Konjatić (predsjednik povjerenstva)
Committee memberMarko Katinić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analiziran pristup podmodeliranju koji daje rješenja (naprezanja, deformacija,...) jednog manjeg dijela modela, koji je sastavni dio većeg modela. Manji dio modela može biti sitnije i gušće umrežen od većeg dijela modela s grubljom mrežom, te su njegova rješenja time točnija od većeg dijela modela, koji zbog grublje mreže ne može imati takvu točnost. Takav pristup naziva se podmodeliranje. Biti će objašnjeni konačni elementi koji su ključni u podmodeliranju. 1D, 2D i 3D konačni elementi će biti ukratko opisani. Biti će objašnjeni razni pristupi podmodeliranju, prednosti i nedostaci podmodeliranja te numerički proračun konstrukcije primjenom podmodeliranja. Zatim će se analizirati rezultati bez primjene podmodeliranja i rezultati s primjenom podmodeliranja. Koristit će se softveri Solidworks i Ansys.
Abstract (english)
This paper analyzes approach to the submodeling, which provides solutions (stresses, deformation,...) for a smaller part of a model, which is a part of a larger model. The smaller part of the model have a denser mesh than a large model, which is more accurate from the larger part of the model which has the rougher mesh. This approach is called submodeling. Finite elemenths which are essential in submodeling will be explained. 1D, 2D and 3D elemenths will be shortly explained. Different approaches to submodeling will be described, benefits and disadvantages and numerical calculation of construction using submodeling will be performed. After that, calculation results will be analyzed with and without submodeling. Ansys and Solidworks software will be used. Solidworks as a tool for modeling and Ansys for numerical analysis of model and submodel, using finite elemenths
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:364530
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-11-02 11:50:59