prikaz prve stranice dokumenta LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA
Access restricted to students and staff of home institution
undergraduate thesis
LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:329772
Božić, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Božić, M. (2016). LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:329772

Božić, Marko. "LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:329772

Božić, Marko. "LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:329772

Božić, M. (2016). 'LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:329772

Božić M. LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 December 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:329772

M. Božić, "LIJEVANJE AUTOMOBILSKOG BLOKA MOTORA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:329772

Metadata
TitleLIJEVANJE AUTOMOBILSKOG BLOKA MOTORA
Title (english)Automotive engine block casting
AuthorMarko Božić
MentorDaniel Novoselović (mentor)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-08, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je prikazan proces lijevanja automobilskog bloka motora. Polazi se od povijesnog razvoja ljevarstva, razvoja tehnologija lijevanja, do današnjih postupaka izrade bloka motora. Prikazani su današnji zahtjevi za izradu blokova motora, te su opisani pojedini dijelovi automobila, koji se također izrađuju lijevanjem. Pojašnjeni su postupci lijevanja za izradu bloka motora, načini izrade kalupa, korišteni modeli i legure pogodne za izradu bloka motora. Pojašnjen je proces pripreme kalupa, ulijevanja litine, hlađenja odljevaka, te njegovog istresanja, čišćenja i naposljetku mehaničke obrade odljevaka. Detaljno je objašnjen postupak lijevanja bloka motora pomoću tlačnog lijeva, materijali koji se koriste, te dan osvrt na svojstva pojedine legure.
Abstract (english)
In this paper the process of casting automobile engine block will be shown. The starting point is the historical development of casting, casting technology development to the present methods of making the engine block. It also shows the current demands placed on the engine blocks and describes some parts of the car that was also made by casting. It explains the process of preparing a mold, pouring iron, casting cooling, and its dump cleaning and finally mechanical machining of castings. Besides, it explaines in detail the process of casting the cylinder block using die-cast, materials used, and the review of the properties of certain alloys.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:329772
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-20 10:30:18