prikaz prve stranice dokumenta RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM
Access restricted to students and staff of home institution
master's thesis
RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:080303
Kocić, Ivan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Kocić, I. (2016). RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:080303

Kocić, Ivan. "RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:080303

Kocić, Ivan. "RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:080303

Kocić, I. (2016). 'RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:080303

Kocić I. RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:153:080303

I. Kocić, "RAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:080303

Metadata
TitleRAZVOJ, KONSTRUIRANJE I IZRADA PROTOTIPA ZA MODELIRANJE TOPLJENIM DEPOZITOM
Title (english)DEVELOPMENT, DESIGN AND PRODUCTION THE PROTOTYPE FOR FUSED DEPOSITION MODELING (FDM)
AuthorIvan Kocić
MentorŽeljko Ivandić (mentor)
Committee memberŽeljko Ivandić (član povjerenstva)
Committee memberDražan Kozak (predsjednik povjerenstva)
Committee memberMirko Karakašić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U poglavljima koja slijede prikazan je razvoj i konstruiranje uređaja za modeliranje topljenim depozitom na temelju kojih je isti i izrađen. U radu je prvotno analizirana i predočena problematika brze izrade prototipa, svrha STL datoteka u procesu izrade modela topljenim depozitom, kao i načela te pojedine faze izrade u aditivnoj proizvodnji. Razumijevanje osnovnih teorijskih i praktičnih pitanja koje treba riješiti usmjerilo je k jasnijem definiranju konstrukcijskog procesa tehničkog sustava. Konstrukcijske i funkcionalne značajke uređaja za modeliranje topljenim depozitom prikazane su kroz listu zahtjeva, morfološku matricu i funkcijsku strukturu odabranog rješenja. Opisivanjem proizvoda pomoću njegove funkcije omogućen je prikaz rješenja neovisno o njegovom obliku. Analitičkim i numeričkim proračunom analizirane su geometrijske značajke najvažnijih komponenti prema kojima je u konačnici dimenzioniran uređaj. Naposljetku je opisan cijeli proces izrade uređaja uključujući dizajn i princip rada karakterističnih detalja.
Abstract (english)
The following chapters of this thesis are describing development and construction of fused deposition modeling device. Those basis are used for making that device „alive“. In the thesis were initially analyzed and presented problems of rapid prototyping, the purpose of STL files used in the process of developing fused deposition model, as well as the principles and certain phases of the additive manufacturing. Understanding the basics of theoretical and practical issues that need to be solved, lead towards more understandable definition for developing process of the technical system. The structural and functional features of the fused deposition modeling device are shown through the product requirement list (list of demands), morphological matrix and functional structure of the selected solution. Describing the product with its function, enables to view solutions regardless of its form. Analytical and numerical analysis were used to analyse geometrical features of the most important components related to device dimensioning. The final chapter describes the whole process of making the device including design and operating principle of characteristical details.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:080303
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-21 11:47:13