prikaz prve stranice dokumenta Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1
Access restricted to students and staff of home institution
master's thesis
Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:929918
Matjačić, Danijel
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Matjačić, D. (2016). Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:929918

Matjačić, Danijel. "Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:929918

Matjačić, Danijel. "Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:929918

Matjačić, D. (2016). 'Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 31 August 2024, https://urn.nsk.hr/urn:nbn:hr:153:929918

Matjačić D. Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 August 31] Available at: https://urn.nsk.hr/urn:nbn:hr:153:929918

D. Matjačić, "Tehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:929918

Metadata
TitleTehnologija izrade modela proizvoda iz poliuretana prema crtežu oznake DM1
Title (english)PRODUCTION TECHNOLOGY FOR THE MODEL OF FINAL PRODUCT TO BE MADE OF POLYURETHANE ACCORDING TO DRAWING DM1
AuthorDanijel Matjačić
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberStjepan Aračić (predsjednik povjerenstva)
Committee memberAndrijana Milinović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je istražen i opisan postupak izrade modela zupčanika, od poliuretana, za lijevanje. Prije same izrade potrebno se bilo upoznati sa pravilima konstruiranja modela za lijevanje, odabirom materijala i namjenom modela. Dimenzije zupčanika određuju se proračunom. Pomoću proračunatih dimenzija model zupčanika se konstruira u 3D programu, pritom valja pripaziti na pravila konstruiranja ljevačkih modela. Samo konstruiranje zahtjeva dobro poznavanje tehnologije oblikovanja pomoću računala. Model zupčanika izrađen je prema crtežu DM1. Odabir materijala za izradu ovisi o veličini proizvodnje, složenosti, kvaliteti površine i dimenzijama modela. Izrada programskog koda za CNC stroj napravljena je od strane stručne osobe za upravljanje strojem. U radu su također navedena svojstva korištene ploče od poliuretana. U praktičnom dijelu rada opisan je postupak obrade modela na CNC glodalici. Također navedeni su primijenjeni alati i njihovi parametri obrade.
Abstract (english)
The paper explores and describes the process of making a gear pattern from polyurethane for casting. Prior to the development you should be informed with the rules of constructing patterns for casting. You need to select a compatible material and the function of the model. The dimensions of the gear are beeing determined by the estimate. Using the calculated dimension the model gear is getting constructed in a 3D program, where the attention should be paid to the construction rules for casting pattern. Designing a model requires a good knowledge of computer skills. The gear pattern is been made according to the drawing DM1 . The choice of materials for the production depends on the size of production, complexity, surface quality and dimensions of the model. The program code for the CNC machine was created by a professional who is operating with the machine. In the paper are also mentioned the properties of a used slab of polyurethane. The practical part of the paper describes the procedure of processing models on a CNC milling machine. Also there are listed applied tools and their processing parameters.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:929918
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-21 11:57:18