prikaz prve stranice dokumenta Tehnologija izrade proizvoda prema crtežu oznake KM01
Access restricted to students and staff of home institution
undergraduate thesis
Tehnologija izrade proizvoda prema crtežu oznake KM01
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:479806
Mandić, Krešimir
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Mandić, K. (2016). Tehnologija izrade proizvoda prema crtežu oznake KM01 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:479806

Mandić, Krešimir. "Tehnologija izrade proizvoda prema crtežu oznake KM01." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:479806

Mandić, Krešimir. "Tehnologija izrade proizvoda prema crtežu oznake KM01." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:479806

Mandić, K. (2016). 'Tehnologija izrade proizvoda prema crtežu oznake KM01', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 August 2024, https://urn.nsk.hr/urn:nbn:hr:153:479806

Mandić K. Tehnologija izrade proizvoda prema crtežu oznake KM01 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 August 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:479806

K. Mandić, "Tehnologija izrade proizvoda prema crtežu oznake KM01", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:479806

Metadata
TitleTehnologija izrade proizvoda prema crtežu oznake KM01
Title (english)Technology of making product according to the drawing mark
AuthorKrešimir Mandić
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U okviru ovog završnog rada obrađena je tehnologija izrade proizvoda prema tehničkom crtežu. Odabran je proizvod koji se u postupku izrade obrađuje na tokarilici i glodalici. Odabrani proizvod je vratilo koja je samo mali dio sklopa zračnog bata.Pošto je obrada odvajanjem čestica danas jedna od najviše primjenjnih tehnologija obrade, za svaki je proizvod potrebno posebno definirati uvjete obrade. Način i uvjeti obrade ovise o puno faktora kao što su parametri obrade, materijal obratka i dr. i oni će biti pojašnjeni u teorijskom dijelu.Eksperimantalni dio se sastoji od proračuna za pripremu i upravljanje proizvodnjom za odabrani proizvod, a sam postupak je primjenjen u tvrtki Unidal iz Vinkovaca.
Abstract (english)
In this final paper discussed the technology of making products according to technical drawing.I select the product that is in the process of making deals on lathes and milling machines. Selected product is spinning shaft, which is only a small part of the air piston assembly.Since the processing by particle is now one of the most applied processing technology, for each product should be particularly defined processing conditions.The method and processing conditions depend on many factors such as processing parameters, material workpiece, etc. And they will be explained in the theoretical part.Experimental part is composed of the budget for the preparation and production management for the selected product, and the procedure is applied in company Unidal from Vinkovci.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:479806
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-21 12:48:57