prikaz prve stranice dokumenta Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016
Access restricted to students and staff of home institution
master's thesis
Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:376182
Kešinović, Bono
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Kešinović, B. (2016). Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:376182

Kešinović, Bono. "Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:376182

Kešinović, Bono. "Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:376182

Kešinović, B. (2016). 'Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 21 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:376182

Kešinović B. Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 December 21] Available at: https://urn.nsk.hr/urn:nbn:hr:153:376182

B. Kešinović, "Proračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:376182

Metadata
TitleProračun i konstrukcija alata za štancanje i rezanje proizvoda oznake BN-KE2016
Title (english)THE CALCULACION AND DESING TOOLS FOR STAMPING AND CUTTING PRODUCT LABELD BN-KE2016
AuthorBono Kešinović
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberDaniel Novoselović (predsjednik povjerenstva)
Committee memberAndrijana Milinović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-21, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je analizirana konstrukcija alata za štancanje i rezanje lima prema crtežu Alat-rešetka SV. Prema dosadašnjim mjerenjima, koja su provedena u primjeni, pokazano je da je brzinu izrade limova moguće povećati. Zadatkom je trebalo analizirati konstrukciju štance i škara za rezanje lima, odrediti numeričkim i eksperimentalnim putem vlastiti alat za izradu lima, te na osnovu tih spoznaja predložiti rješenja poboljšanja izarde. Teorijska analiza pokazala je da je moguće povećati produktivnost izrade, obzirom na to da je mogućnost štance veća nego korištena. Eksperimentalna analiza pokazala je da je moguće koristenje više alata prilikom izrade lima, odnosno brzi način izrade uz pomoć više alata. Rezultati analize za rezanje limova pokazuju da primjenom pneumatskih cilindara na škarama za rezanje lima također povećavaju produktivnost i točnost izrade.
Abstract (english)
The paper analyzes the construction of stamping tools and metal cutting for the drawing tool-grid SV. According to previous measurements, which were performed in the application, it nos been shown that the speed of sheet metal can be improved. For this work it was neceesary to analyze the construction of punches and scissors for cutting sheet metal, to specify by NUMERIC and eksperimental approach desisn of tod tools for making steel, and based on this knowledge, to propose solutions in order to improve production. Theoretical analysis has shown that it is possible to increase the productivity of development, considering that the possibility stamprng production possibility is much higher than one which is currently used in the production process Stan higher than used. Experimental analysis has shown that it is possible to use multiple tools when making steel, and quick way of making with the help of several tools. Results of analysis for sheet metal cutting show that the application of pneumatic cylinders on a pair of scissors for cutting sheet metal also increases the productivity and accuracy of manufacture.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:376182
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-23 12:48:05