prikaz prve stranice dokumenta OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016
Access restricted to students and staff of home institution
undergraduate thesis
OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:615736
Mlivić, Denis
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Mlivić, D. (2016). OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016 (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:615736

Mlivić, Denis. "OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:615736

Mlivić, Denis. "OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:615736

Mlivić, D. (2016). 'OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:615736

Mlivić D. OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016 [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:615736

D. Mlivić, "OBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:615736

Metadata
TitleOBLIKOVANJE I PRORAČUN DALJINSKI UPRAVLJANOG NATJECATELJSKOG AUTO MODELA RC-MD-2016
Title (english)DESIGN AND CALCULATION OF PARAMETERS OF REMOTE CONTROLLED THE COMPETITION CAR MODEL RC-MD-2016
AuthorDenis Mlivić
MentorŽeljko Ivandić (mentor)
Committee memberŽeljko Ivandić (član povjerenstva)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberMirko Karakašić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je opisan postupak pretvorbe postojećeg automodela na daljinsko upravljanje za makadamske off-road utrke u natjecateljski cestovni model. Auto-model na daljinsko upravljanje za makadamske off-road utrke (off-road buggy) namijenjen je za utrke po svim vrstama podloge (zemlja, trava, tepih), s mnogim skokovima i preprekama na stazi. S druge strane, natjecateljski cestovni model namijenjen je isključivo za utrke na posebno pripremljenih ravnim asfaltnim stazama, na kojima nema skokova niti prepreka. Uzevši u obzir navedene razlike, te dvije vrste modela bitno se razlikuju u mnogočemu. Ideja završnog rada je bila konstruirati i izraditi sve potrebne dijelove za uspješnu pretvorbu off-road buggy modela na daljinsko upravljanje u natjecateljski cestovni model na daljinsko upravljanje, držeći se pritom pravila krovne europske automodelarske institucije EFRA-e. Ideja za rad rodila se na prvenstvu Europe u utrkama automodela, prilikom razgovora sa vlasnikom tvrtke “JQRacing”, specijalizirane za off-road modele. Kroz razgovor se pokrenula tema pretvorbe tvrtkinog modela u model novonastale, no vrlo popularne GT klase. Zadatkom je trebalo analizirati funkcionalne i konstrukcijske značajke automodela klase 1:8 buggy i 1:8 GT te razlike između dvaju klasa. Na osnovi tih spoznaja te dobivenih numeričkih i eksperimentalnih rezultatakonstruirani su potrebni dijelovi za preinaku.
Abstract (english)
This thesis describes the process of converting an existing radio-controlled off-road model car into a competition-grade on-road model car. A radio-controlled model car for off-road racing (off-road buggy) is designed for racing on all types of terrains (gravel, grass, carpet), with many jumps and obstacles on the way. On the other hand, a competition-grade on-road model car is meant to race exclusively on smooth and specially prepared tarmac surfaces, without any jumps or obstacles. With that in mind, the two types of model cars differ greatly in many areas. The idea for this thesis was to design and construct all necessary parts for a succesfull conversion onf a off-road buggy radio-controlled model car into a competition-grade on-road radio-controlled model car, within the rules of the European Federation of Radio operated model Automobiles, EFRA. The idea for the thesis was born at the European Championship for radio-controlled model cars, during a conversation with the owner of the company “JQRacing”, specialised in off-road model cars. During the conversation the idea of converting the company’s existing off-road model car into a car for the new, but very popular GT class. The goal of the thesis was to analyse the functional and design characteristics of 1:8 buggy and 1:8 GT model cars and their differences. Based on those findings and the numerical and experimental results new parts needed for the conversion were designed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:615736
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-28 10:58:25