prikaz prve stranice dokumenta FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE
Access restricted to students and staff of home institution
master's thesis
FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:868461
Stojčić, Hrvoje
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Stojčić, H. (2016). FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:868461

Stojčić, Hrvoje. "FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:868461

Stojčić, Hrvoje. "FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:868461

Stojčić, H. (2016). 'FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:868461

Stojčić H. FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:868461

H. Stojčić, "FUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:868461

Metadata
TitleFUNKCIJSKA ANALIZA I IZRADA PARAMETARSKOG MODELA RUČNE DIZALICE
Title (english)FUNCTIONAL ANALYSIS AND DEVELOPMENT OF HAND CRANE PARAMETRIC MODEL
AuthorHrvoje Stojčić
MentorMirko Karakašić (mentor)
Committee memberMirko Karakašić (član povjerenstva)
Committee memberŽeljko Ivandić (predsjednik povjerenstva)
Committee memberPejo Konjatić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-29, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu obrađena je tema izrade 3D parametarskog modela u računalnom programu SolidWorks 2016 na primjeru ručne dizalice. Na samom početku dan je kratak osvrt na podjelu programa za 3D modeliranje te je prikazana usporedba mogućnosti pojedinih od njih. Ukratko su opisani i prikazani prostorni modeli na kojima se zasniva rad programa za 3D modeliranje. Funkcijskom dekompozicijom ručne dizalice prikazani su sastavni dijelovi ručne dizalice te je objašnjena funkcionalnost svih dijelova. Prikazan je proračun svih pet varijanti ručne dizalice koje se razlikuju prema težini tereta koji se podiže, visini na koju se teret podiže te prema vrsti materijala od kojeg su izrađeni navojno vreteno i matica s podizačem tereta. Na osnovu dobivenih vrijednosti dimenzija ručnih dizalica, izdvojene su dimenzije koje se mijenjaju ovisno o zadanim ulaznim podacima te se razlikuju ovisno o varijanti te su određene kao parametarske dimenzije. Na samom kraju diplomskog rada prikazana je izrada 3D parametarskog modela ovisno o vrijednostima dimenzija dobivenih u prethodnim proračunima ručne dizalice.
Abstract (english)
In this thesis is presented and described theme about creating and making 3D parametric model in solid modeling computer program SolidWorks 2016 on example of hand crane. At the beginning of a brief snapshot review is presented divisions of 3D modeling computer softwares and comparison and capabilities of each one of them. Spatial models are briefly described on which 3D modeling softwares are based. On example of functional decomposition of hand crane all parts and funcionality of hand crane is presented. All five variants of hand crane are analyzed and calculated on based difference which vary according to the weight of the load being lifted, the height to which the load is lifted and by the type of material from which threaded spindle and nut with lifter cargo are made. Based on the obtained and given values of the dimensions of hand crane, dimensions are selected that are changing, depended on the given input data and they differ depending on the variations and they are defined as parametric dimensions. At the end of thesis is presented and described the development of 3D parametric model dependent on dimension values selected in previous calculations of hand crane.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:868461
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-09-30 09:58:57