prikaz prve stranice dokumenta KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE
Access restricted to students and staff of home institution
master's thesis
KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:069326
Kokorić, Slaven
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Kokorić, S. (2016). KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:069326

Kokorić, Slaven. "KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:069326

Kokorić, Slaven. "KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:069326

Kokorić, S. (2016). 'KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:069326

Kokorić S. KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:069326

S. Kokorić, "KONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:069326

Metadata
TitleKONSTRUKCIJSKE I FUNKCIONALNE ZNAČAJKE KAMIONSKE RALICE
Title (english)CONSTRUCTION AND FUNCTIONAL CHARACTERISTICS OF TRUCK SNOWPLOW
AuthorSlaven Kokorić
MentorMirko Karakašić (mentor)
Committee memberMirko Karakašić (član povjerenstva)
Committee memberMilan Kljajin (predsjednik povjerenstva)
Committee memberŽeljko Ivandić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj diplomskog rada je konstrukcijski razvoj kamionske ralice te provjeravanje zadovoljavanja maksimalnom opterećenju. Na samom početku rada istraživat će se koja postojeća rješenja postoje na tržištu te ih iskoristit kao sustav informacija za daljnje razvijanje našeg proizvoda. Nakon prikupljanih informacija postavit će se lista zahtjeva i želja te formiranje grube funkcijske strukture proizvoda. Iz grube funkcijske strukture raspisana je tablica gdje se vide svi parametri. Zatim se pristupa modeliranju pojedinih pozicija našeg proizvoda pomoću programa SolidWorks 2016. Nakon što su se iz modelirale pojedine pozicije, sklapaju se najprije u pod sklopove proizvoda, a potom pod sklopove spajamo u gotovi proizvod. Svakom pod sklopu se provjerava maksimalna naprezanja prema stvarnim uvjetima pomoću programa AnsysWorkbanch 16.2. Kada je cijela konstrukcija zadovoljila naprezanju, završili smo s daljnjom analizom.
Abstract (english)
The aim of this paper is construction development of truck snowplow and crosscheck of its maximum load At the beginning of the paper existing solutions will be examined and used as an information system for further development of the product. After gathering all the needed information, a list of requirements and wishes will be compiled as well as rough functional structure of the product. Along with it, excel table with parameters will be presented. The next step will be modelling of individual positions of the product made with SolidWorks 2016 computer programme. After certain positions have been modeled, they will be concluded in the first subassemblies of the product, and then those subassemblies will be connected in the finished product. Every subassembly will be checked for maximum strain, based on real conditions, with the help of AnsysWorkbanch 16.2. programme. When the whole construction satisfies the straining, the paper will finish with further analysis.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:069326
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-10-04 12:52:20