prikaz prve stranice dokumenta UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA
Access restricted to students and staff of home institution
master's thesis
UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:496826
Mrčela, Zvonimir
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Mrčela, Z. (2016). UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:496826

Mrčela, Zvonimir. "UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:496826

Mrčela, Zvonimir. "UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:496826

Mrčela, Z. (2016). 'UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:496826

Mrčela Z. UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:153:496826

Z. Mrčela, "UTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:496826

Metadata
TitleUTJECAJ PARAMETARA INJEKCIJSKOG PREŠANJA NA RASTEZNA SVOJSTVA PE OTPRESKA
Title (english)INFLUENCE OF INJECTION MOLDING PARAMETERS ON TENSILE PROPERTIES OF PE MOLDED PART
AuthorZvonimir Mrčela
MentorPero Raos (mentor)
Committee memberPero Raos (član povjerenstva)
Committee memberZlatko Tonković (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovoga diplomskog rada jest „utjecaj parametara injekcijskog prešanja na rastezna svojstva polietilenskog otpreska“, pa je u njegovu sklopu bilo vrlo važno opisati sam polietilen, njegova fizikalna i mehanička svojstva, te proces injekcijskog prešanja, s posebnom naznakom na podesive parametre injekcijskog prešanja. Prvi dio rada kratko se bazira na opisu polimera i daje nam uvid o kakvoj skupini materijala je riječ, dok je nadalje naglasak stavljen na polietilen (PE) i njegova svojstva te na postupak injekcijskog prešanja i njegove podesive parametre. Teoretski razrađena svojstva polietilena, injekcijskog prešanja i podesivih parametara uvode u završni dio rada, u kojem je na eksperimentalan način dokazan njihov utjecaj. Ispitivana je temperatura taljevine i naknadni tlak, jer je pretpostavljeno da ova dva parametra imaju značajan utjecaj na rastezna svojstva polietilena (PE). Ispitivanja su obavljena u laboratoriju Strojarskog fakulteta u Slavonskom Brodu. Materijal korišten u procesu prešanja je kristalasti plastomer polietilen PE MG9621B proizvođača Borealis, a oprema korištena u radu je ubrizgavalica BOY XS, temperiralo Regloplas 90s i kidalica Shimadzu AGS-X 10 kN. Svi dobiveni podatci mjerenja u radu su prikazani tablično, dijagramski ili histogramski.
Abstract (english)
The topic of this graduation thesis is the “influence of injection molding parameters on the tensile properties of a polyethylene molded article,” so it was extremely necessary to describe polyethylene and its physical and mechanical characteristics within the thesis, as well as the injection molding process, with a special emphasis on the adjustable injection molding parameters. The first part of the thesis is briefly based on a description of polymers, providing for an insight into that material group, whereas a further emphasis is placed on polyethylene (PE) and its characteristics, as well as on an injection molding procedure and its adjustable parameters. The theoretically analyzed polyethylene, injection molding, and adjustable parameters characteristics are an introduction to the final part of the thesis, in which their influence is experimentally proven. Examined were the melt temperature and the holding pressure, for it was hypothesized that these two parameters exert a significant influence on the polyethylene (PE) tensile properties. The testing took place at the Faculty of Mechanical Engineering in Slavonski Brod. The material used in the molding procedure was the semicrystalline thermoplastic polyethylene PE MG9621B manufactured by Borealis, whereas the equipment applied during the work was the BOY XS injection molding machine, the Regloplas 90s temperature control unit, and the 10-kilonewton Shimadzu AGS-X tensile testing machine. In the thesis, all the obtained measurement data are depicted as tables, diagrams, or histograms.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:496826
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-10-11 12:13:50