prikaz prve stranice dokumenta KONTROLA KVALITETE PLINSKE INSTALACIJE
Access restricted to students and staff of home institution
master's thesis
KONTROLA KVALITETE PLINSKE INSTALACIJE
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:623292
Barać, Luka
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Barać, L. (2017). KONTROLA KVALITETE PLINSKE INSTALACIJE (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:623292

Barać, Luka. "KONTROLA KVALITETE PLINSKE INSTALACIJE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:623292

Barać, Luka. "KONTROLA KVALITETE PLINSKE INSTALACIJE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:623292

Barać, L. (2017). 'KONTROLA KVALITETE PLINSKE INSTALACIJE', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:623292

Barać L. KONTROLA KVALITETE PLINSKE INSTALACIJE [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:623292

L. Barać, "KONTROLA KVALITETE PLINSKE INSTALACIJE", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:623292

Metadata
TitleKONTROLA KVALITETE PLINSKE INSTALACIJE
Title (english)QUALITY INSPECTION OF GAS INSTALLATION
AuthorLuka Barać
MentorLeon Maglić (mentor)
Committee memberStjepan Aračić (predsjednik povjerenstva)
Committee memberLeon Maglić (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je provedena kontrola kvalitete plinske instalacije, te je opisan sam postupak jednog ispitivanja plinske instalacije iz prakse. Kako se radi o plinskoj instalaciji, opisan je i plin kao medij, te zakoni i propisi koji su temelji ovakvog jednog ispitivanja. Rad se sastoji od teoretskog dijela, te eksperimentalnog dijela ispitivanja instalacije iz prakse. Eksperimentalni dio rada se sastoji od mjerenja pada tlaka na instalaciji koje je provedeno pri radu na terenu za tvrtku ZAVOD ZA ISTRAŽIVANJE I RAZVOJ SIGURNOSTI d.o.o. Pomoću dobivenih podataka iz mjerenja pristupilo se njihovoj analizi. Izračunata je propusnost plinske instalacije, a rezultati su uspoređeni s važećim pravilnicima.
Abstract (english)
The quality control of the gas installation has been carried out in this paper, and I have described the procedure of a gas installation test from practice. As for gas installation, gas is described as medium, as well as the laws and regulations that are the basis of this kind of test. The work consists of a theoretical part and an experimental part of the test of installation from practice. The experimental part of the work consists of measurement of the pressure drop on the installation performed in field work for the company ZAVOD ZA ISTRAŽIVANJE I RAZVOJ SIGURNOSTI d.o.o. Using the data obtained from the measurement, their analysis was started. The gas data has been calculated using the data obtained, and the results are compared to the valid rulebooks.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:623292
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-07-12 11:57:16