prikaz prve stranice dokumenta Tehnologija izrade proizvoda prema crtežu oznake DB01
Access restricted to students and staff of home institution
master's thesis
Tehnologija izrade proizvoda prema crtežu oznake DB01
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:336683
Blažević, Danijel
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Blažević, D. (2016). Tehnologija izrade proizvoda prema crtežu oznake DB01 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:336683

Blažević, Danijel. "Tehnologija izrade proizvoda prema crtežu oznake DB01." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:336683

Blažević, Danijel. "Tehnologija izrade proizvoda prema crtežu oznake DB01." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:336683

Blažević, D. (2016). 'Tehnologija izrade proizvoda prema crtežu oznake DB01', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:336683

Blažević D. Tehnologija izrade proizvoda prema crtežu oznake DB01 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:336683

D. Blažević, "Tehnologija izrade proizvoda prema crtežu oznake DB01", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:336683

Metadata
TitleTehnologija izrade proizvoda prema crtežu oznake DB01
Title (english)Technology of product manufacturing according to drawing DB01
AuthorDanijel Blažević
MentorAntun Stoić (mentor)
Committee memberLeon Maglić (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberAntun Stoić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-06-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U diplomskom radu opisana je tehnologija izrade zakretnog kraka prema crtežu oznake DB01. Objašnjena je uloga zakretnog kraka u hidrauličnoj preši za vulkanizaciju guma, te su ukratko opisane tehnološke operacije bušenja i glodanja koje su korištene pri izradi ovog proizvoda. Definiran je materijal i navedeni su tehnološki zahtjevi i značajke postupka obrade odvajanjem čestica. Dalje je u radu opisan tehnološki postupak izrade pozicija od koji se sastoji zakretni krak. Razrađena je kompletna tehnologija strojne obrade na horizontalnoj glodalici – bušilici, te je naveden redoslijed svih korištenih operacija tijekom procesa proizvodnje. Proveden je izbor alatnog stroja, reznih alata, steznih elemenata i mjernih uređaja uz opis načina rada odabranog alatnog stroja sa svim tehničkim specifikacijama. Na osnovu postojeće tehnologije izrade, predložena su poboljšanja tehnološkog postupka izrade zakretnog kraka. Provedena tehno-ekonomska analiza daje nam uvid u ekonomičnost izrade proizvoda, a u zaključku je rezimirano na koji se način cijeli proces može optimizirati.
Abstract (english)
In the graduate work is described technology of manufacturing swiveling arm according to the drawing tags DB01. Is explained the role of swiveling arm in a hydraulic press for vulcanizing rubber and are briefly described the technological operation of drilling and milling that were used in the preparation of this product. Is defined by the material and listed the technological requirements and the features of the machine processing. Further in the paper it is describes the technological process of making the position of which consists swiveling arm. It is elaborated the complete technology of machining on a horizontal milling - boring machine and indicated the order of operations used during the manufacturing process. Implemented a selection of machine, cutting tools, clamping elements and measuring devices along with a description of the selected machine with all the technical specifications. On the basis of existing technology development, the proposed the improvements of the technological process of making the swiveling arm. Conducted techno-economic analysis gives us an insight into the economics of making product and in the conclusion summarize how the whole process can be optimized.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:336683
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-07-04 10:19:28