prikaz prve stranice dokumenta OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA
Access restricted to students and staff of home institution
master's thesis
OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:807356
Đilas, Andrea
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Đilas, A. (2017). OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:807356

Đilas, Andrea. "OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:807356

Đilas, Andrea. "OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:807356

Đilas, A. (2017). 'OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:807356

Đilas A. OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:807356

A. Đilas, "OBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:807356

Metadata
TitleOBLIKOVANJE TEHNOLOŠKOG PROCESA IZRADE PUMPE KORISTEĆI NUMERIČKE TEHNOLOGIJE U PODRUČJU TOKARENJA
Title (english)DESIGN TECHNOLOGY PROCESS OF MAKING PUMPS USING NUMERIC TECHNOLOGY IN THE TURNING AREA
AuthorAndrea Đilas
MentorTomislav Šarić (mentor)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
Committee memberGordana Zeba (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovim diplomskim radom prikazano je oblikovanje tehnološkog procesa izrade pumpe koristeći Siemens PLM softver NX 10 u području tokarenja. U teorijskom dijelu opisana je Industrija 4.0, proces tokarenja na CNC (eng. Computer Numerical Control) obradnim sustavima, te programiranje CNC strojeva. U praktičnom dijelu diplomskog rada prikazan je ručno pisan program za Sinumerik 840D, te tehnološki proces izrade dijelova pumpe korištenjem Siemens PLM softver NX 10, na taj način dobivena je tehnološka dokumentacija. Na edukacijskoj CNC tokarilici EMCO CONCEPT TURN 105 izrađeni su predmeti korištenjem definirane dokumentacije.
Abstract (english)
This master thesis presents the desing of the technological process of pump production using the Siemens PLM software NX 10 in the field of turning. Theoretical pare describes Industry 4.0, CNC (Computer Numerical Control) machining processes, and programming of CNC machines. Practical part of the master thesis presents a handwritten program for Sinumerik 840D and tehnological process of making the pump parts using the Siemens PLM software NX 10, so the technical documentation is obtained. The educational CNC lathe machin EMCO CONCEPT TURN 105 were made using the defined documentation
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:807356
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-07-14 09:25:48