prikaz prve stranice dokumenta TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI
Access restricted to students and staff of home institution
master's thesis
TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:210744
Kudrnaček, Damjan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Kudrnaček, D. (2017). TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:210744

Kudrnaček, Damjan. "TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:210744

Kudrnaček, Damjan. "TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:210744

Kudrnaček, D. (2017). 'TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:210744

Kudrnaček D. TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:210744

D. Kudrnaček, "TEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:210744

Metadata
TitleTEČENJE TALJEVINE U KALUPNOJ ŠUPLJINI
Title (english)Melt flow in the mold cavity
AuthorDamjan Kudrnaček
MentorPero Raos (mentor)
Committee memberAndrijana Milinović (predsjednik povjerenstva)
Committee memberPero Raos (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu je opisan je postupak injekcijskog prešanja plastomera. Prikazani su svi dijelovi kalupa za injekcijsko prešanje te je detaljno objašnjena njihova funkcija. Opisan je sustav za vađenje otpreska iz kalupa, sustav za temperiranje kalupa te sustavi za vođenje i centriranje kalupa. Nakon toga slijedi reološki proračun kalupa, određivanje potrebnog tlaka u kalupnoj šupljini te dimenzioniranje uljevnog sustava kalupa i proračun tlaka u kalupu. Nakon toga u programskom paketu Moldflow Adviser izvršena je računalnu simulaciju punjenja kalupne šupljine za odabrane materijale. Izvršen je analiza odabranog modela, analiza za optimalno mjesto postavljanja ušća te indikatora otpora protoka. Po završetku toga napravljena je simulacija punjenja kalupne šupljine.
Abstract (english)
In this graduate thesis is described the process of injection molding of thermoplastics. All parts of the mold for injection molding are presented and their function is explained in detail. There are described mold removal system, mold tempering system, systems for managing and centering mold. After that comes reological calculation of mold, determining the required pressure in the mold cavity, dimensioning of injection system and mold pressure calculation. After that in programme package Moldflow Adviser was done the computer simulation of filling mold cavities for selected materials. An analysis of the selected model and analysis of the optimal position of the lining and the flow resistance indicator were made. By the ending of simulation of the filling mold cavity was made too.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:210744
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-07-14 11:08:02