prikaz prve stranice dokumenta SIMULACIJA INJEKCIJSKOG PREŠANJA
Access restricted to students and staff of home institution
master's thesis
SIMULACIJA INJEKCIJSKOG PREŠANJA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:183399
Mavrić, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Mavrić, T. (2017). SIMULACIJA INJEKCIJSKOG PREŠANJA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:183399

Mavrić, Tomislav. "SIMULACIJA INJEKCIJSKOG PREŠANJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:183399

Mavrić, Tomislav. "SIMULACIJA INJEKCIJSKOG PREŠANJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:183399

Mavrić, T. (2017). 'SIMULACIJA INJEKCIJSKOG PREŠANJA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:183399

Mavrić T. SIMULACIJA INJEKCIJSKOG PREŠANJA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:183399

T. Mavrić, "SIMULACIJA INJEKCIJSKOG PREŠANJA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:183399

Metadata
TitleSIMULACIJA INJEKCIJSKOG PREŠANJA
Title (english)Simulation of injection moulding
AuthorTomislav Mavrić
MentorPero Raos (mentor)
Committee memberAndrijana Milinović (predsjednik povjerenstva)
Committee memberPero Raos (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovome radu će se analizirati put od samog početka polimera i polimernih materijala, njihove povijesti, kemijskih svojstava , obradnih svojstava i raznih procesa obrade. Zadržat će se na opisu procesa injekcijskog prešanja, sustava u kojemu se odvija i raščlambe na bitnije komponente tog sustava. Nadalje će se dotaknuti prijelazna točka iz stvarne tehnologije u računalni oblik simulacije i programe koji nam omogućavaju virtualni rad sa stvarnim parametrima. U ovome će se djelu uz pomoć programa za simulaciju injekcijskog prešanja na primjeru otpreska vidljivog na slici 5.1 kroz dva odabrana materijala izvršiti simulacija injekcijskog prešanja i proći kroz kritične točke injekcijskog prešanja, moguće pogreške i poteškoće u svrhu zaključka da li je odabrani materijal adekvatan za izradu odabranog otpreska.
Abstract (english)
In this paper, polymers and polymer materials will be analyzed from their history, chemical properties, manufacturability and various processing technologies. The focus will be on technology of injection molding, injection molding system and major components classification. In addition, it will touch the transition point from real technology to computer simulation and software programs that enable virtual work with actual parameters. In this section, with the help of the injection mold simulation program on an example of the part shown in Figure 5.1 through two selected materials, the simulation of the injection molding will be done and a pass through the critical point of injection molding, possible errors and difficulties in order to conclude whether the selected material is adequate for making the selected mold.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:183399
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-08-29 08:00:47