prikaz prve stranice dokumenta OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU
Access restricted to students and staff of home institution
undergraduate thesis
OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:267804
Katava, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Katava, M. (2017). OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:267804

Katava, Marko. "OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:267804

Katava, Marko. "OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:267804

Katava, M. (2017). 'OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:267804

Katava M. OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 December 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:267804

M. Katava, "OBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:267804

Metadata
TitleOBLIKOVANJE PROIZVODA ZA AUTOMATSKU MONTAŽU
Title (english)DESINGING PRODUCTS FOR AUTOMATIC ASSEMBLY
AuthorMarko Katava
MentorDaniel Novoselović (mentor)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberAndrijana Milinović (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Moderan način života postavlja i nove izazove na industriju i proizvodnju. Želja za većim proizvodnim količinama, povećanoj zaradi i smanjenjem vremena proizvodnje, dovodi do sve veće potrebe za automatizacijom proizvodnih procesa te sve većim korištenjem računala za podršku i brži rad. Tema ovog završnog rada je Oblikovanje proizvoda za automatsku montažu. U radu je opisan proces automatske montaže i simobli koji se koriste za prikaz automatske montaže. U nastavku rada je opisan postupak oblikovanja proizvoda za automatsku montažu, te je taj postupak prikazan na primjeru sklopa membrane plinskoga mjerila.
Abstract (english)
Modern lifestyle sets new challenges to the industry and manufacturing. The desire for larger production volumes, increased earnings and a reduction in production time, leads to a growing need for automated manufacturing processes and the increased use of computers for support and faster work. The subject of this final paper is Designing products for automatic assembly. The paper describes the process of automatic assembly and symbols that are used to display the automatic assembly. The remainder of this paper describes the process of creating products for automatic assembly, and this procedure will be shown using the example of a set of membrane gas gauges.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:267804
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-25 11:23:26