prikaz prve stranice dokumenta ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM
Access restricted to students and staff of home institution
master's thesis
ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:131367
Lukić, Dino
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Lukić, D. (2017). ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:131367

Lukić, Dino. "ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:131367

Lukić, Dino. "ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:131367

Lukić, D. (2017). 'ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:131367

Lukić D. ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:131367

D. Lukić, "ČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:131367

Metadata
TitleČIŠĆENJE KOROZIJE I NEČISTOĆA LASEROM
Title (english)CLEANING OF CORROSION AND IMPURITY WITH LASER
AuthorDino Lukić
MentorStjepan Aračić (mentor)
Committee memberStjepan Aračić (član povjerenstva)
Committee memberLeon Maglić (predsjednik povjerenstva)
Committee memberAndrijana Milinović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad, uz kratak opis te nekoliko riječi o koroziji i laserima, opisuje princip rada i proces iza laserskog uklanjanja hrđe, odnosno na koji način laser uklanjanja nečistoće zajedno sa produktima korozije sa metala, što se sve događa sa materijalom, te u kakvom je stanju nakon obrade i sve ostalo vezano za ovaj relativno novi i nepoznati postupak u ovom polju rada. Zadatak ovog rada jest analizirati te usporediti postupak s ostalim metodama uklanjanja produkata korozije koje se koriste trenutno. Počevši od principa na kojem radi, koliko postupak može biti automatiziran, gdje ga sve i kako možemo koristiti, koji su mu prednosti i nedostatci, te u konačnici, da li je isplativ ili ne.
Abstract (english)
The paper, along with a short description and a few words about corrosion and laser, describes the principle and process behind laser rust removal, in other words, how laser removes impurities along with corrosion products, what happens with material and in what state is material left after the treatment, along with all relevant to this relatively new and unknown procedure in this field of work. The task of this paper is to analyze and compare the procedure with other currently used corrosion products removal methods. Starting from the principle in which it works, how automated the process can be, where and how we can use it, what are its advantages and disadvantages, and ultimately whether it is effective or not.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:131367
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-26 09:38:51