prikaz prve stranice dokumenta PRIMJENA LASERA U STROJARSTVU
Access restricted to students and staff of home institution
master's thesis
PRIMJENA LASERA U STROJARSTVU
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. urn:nbn:hr:153:009820
Musić, Amel
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Musić, A. (2017). PRIMJENA LASERA U STROJARSTVU (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:009820

Musić, Amel. "PRIMJENA LASERA U STROJARSTVU." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:009820

Musić, Amel. "PRIMJENA LASERA U STROJARSTVU." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2017. https://urn.nsk.hr/urn:nbn:hr:153:009820

Musić, A. (2017). 'PRIMJENA LASERA U STROJARSTVU', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:009820

Musić A. PRIMJENA LASERA U STROJARSTVU [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2017 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:009820

A. Musić, "PRIMJENA LASERA U STROJARSTVU", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:153:009820

Metadata
TitlePRIMJENA LASERA U STROJARSTVU
Title (english)Laser application in mechanical engineering
AuthorAmel Musić
MentorIvan Samardžić (mentor)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberLeon Maglić (član povjerenstva)
Committee memberJosip Cumin (predsjednik povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2017-09-13, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Laser stimuliranom emisijom stvara uski snop elekromagnetnog zračenja. Glavna prednost obrade materijala laserom je lakša obrada teško dostupnih dijelova bez mehaničkog kontakta. Česta primjena lasera je u graviranju pri čemu promjena parametara rada rezultira različitim svojstvima gravure, npr. hrapavosti površine. Hipoteza ovog rada jest da brzina, snaga lasera i frekvencija pulsa imaju utjecaj na hrapavost površine nakon obrade. MATERIJALI I METODE: U istraživanju je, korištenjem laserskog uređaja Baublys CF20 IP/NC30, na 3 pločice čelika X5CrNi 18-10 i 3 pločice mesinga CW508L ugravirano 15 kvadrata dimenzija 15x15 mm. Mjerenje hrapavosti izvršeno je pertometrom Surftest SJ310, a uz pomoć programa Design Expert napravljena je analiza odzivne površine u obliku centralno kompozitnog plana pokusa za parametar hrapavosti Rz. Napravljen je MannWhitneyev test za provjeru postojanja razlika između medijana parametara graviranja za čelik i mesing korištenih za postizanje iste hrapavosti. Odabrana razina značajnosti u ovom radu je α=0,05.
Abstract (english)
Laser projects a narrow beam of light by stimulated emission. The main advantage of using lasers in industry is lack of contact and possibility to process hardly reachable parts. Laser engraving enables creating patterns with different proporties, such as surface roughness by changing process parameters. Hypothesis of this study is that the speed and power of laser and frequency of pulse affect engraved surface roughness. MATERIALS AND METHODS: Laser device Baublys CF20 IP/NC30 was used to engrave 15 squares with dimensions 15 x 15 mm on each of the 3 stainless steel X5CrNi 1810 tiles and 3 brass CW508L tiles. Surface roughness was measured using perthometer Surftest SJ-310 and Desing Expert software was used for response surface methodology. Rz parameter was analyzed in central-composite design. Mann-Whitney test was used to determine whether there was a difference between engraving parameters used for two materials to achieve the same surface roughness. Level of significance used in this study was α=0,05.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:009820
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-09-26 12:43:12