prikaz prve stranice dokumenta TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA
Access restricted to students and staff of home institution
master's thesis
TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:293291
Soldo, Slaven
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Soldo, S. (2016). TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:293291

Soldo, Slaven. "TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:293291

Soldo, Slaven. "TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:293291

Soldo, S. (2016). 'TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 31 August 2024, https://urn.nsk.hr/urn:nbn:hr:153:293291

Soldo S. TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 August 31] Available at: https://urn.nsk.hr/urn:nbn:hr:153:293291

S. Soldo, "TEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:293291

Metadata
TitleTEHNOLOŠKI PROCES IZRADE MEMBRANSKOG CIJEVNOG ZIDA KOTLOVSKOG POSTROJENJA
Title (english)MANUFACTURING PROCESS OF MEMBRANE WALL FOR WATERTUBE BOILER
AuthorSlaven Soldo
MentorIvan Samardžić (mentor)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberAntun Stoić (predsjednik povjerenstva)
Committee memberLeon Maglić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu ukratko je opisano područje kotlogradnje, osnove o kotlovskim postrojenjima i proizvodni proces membranskog zida vodocijevnog kotlovskog postrojenja. U prvom dijelu opisan je princip rada parnog kotla, uvjeti eksploatacije i podjele kotlovskih postrojenja. Drugo poglavlje diplomskog rada opisuje komponente kotlovskog postrojenja, materijale koji se primjenjuju i tehnologije koje se primjenjuju u izradi. Navedeni su propisi prema kojima je potrebno provesti izradu kotlovskog postrojenja. U trećem poglavlju na osnovu promatranja unutar proizvodnih pogona tvrtke „Đuro Đaković Termoenergetska postrojenja d.o.o.“ ukratko je opisan tijek izrade membranskog zida. Četvrto poglavlje opisuje primjenu EPP zavarivanja u području kotlogradnje. Opisan je tehnološki proces izrade membranskog panela pomoću EPP zavarivanja kojim se ostvaruje zavareni spoj između cijevi i trake.
Abstract (english)
This paper describes field of steam boiler production, basics about boiler power plants and manufacturing processes for watertube boiler's membrane wall. First chapter describes work principles of steam boiler power plant, conditions of service and examples of boiler types. Second chapter of paper describes main components of boiler power plant, materials that are used for manufacturing, and manufacturing technologies in boiler production. Also there are few words about norms and regulations in boiler production. Third chapter is based on observation of production lines inside of factory „Đuro Đaković Termoenergetska postrojenja d.o.o.“ and it describes production process for a membrane wall. Fourth chapter describes application of FCAW process in boiler production and manufacturing process of membrane panel by using FCAW which is used for welding of tubes and fins. In the last part of this thesis, we have welding technologies explained: both nozzle - header as well as nozzle with header - tubular membrane wall. Procedures are shown in the practical part of this thesis; as well as in all of the mentioned chapters. With every explaination of the theoretical or practical part, sketches and photos that were taken in Đuro Đaković Termoenergetska postrojenja (ĐĐ TEP) workshop are attached. Their purpose is to display some of the terms and activities.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:293291
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-07-15 10:04:40