prikaz prve stranice dokumenta POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA
Access restricted to students and staff of home institution
undergraduate thesis
POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:620095
Andres, Drago
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Andres, D. (2018). POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:620095

Andres, Drago. "POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:620095

Andres, Drago. "POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:620095

Andres, D. (2018). 'POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:620095

Andres D. POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:153:620095

D. Andres, "POSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:620095

Metadata
TitlePOSTUPAK I OPREMA ZA SAVIJANJE CIJEVI PREMA TEHNIČKOM CRTEŽU PR_2018_DA
Title (english)PIPE BENDING PROCEDURE AND EQUIPMENT FOR PRODUCT GIVEN BY TECHNICAL DRAWING PR_2018_DA
AuthorDrago Andres
MentorJosip Cumin (mentor)
Committee memberJosip Cumin (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-07-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U teorijskom dijelu rada opisana su svojstva materijala i kratko opisana naprezanja pri savijanju. Prikazana je podjela strojeva za savijanje i detaljno su prikazane njihove tehničke karakteristike. Kod svake vrste stroja je pojašnjen njezin način rada i potkrijepljeno sa fotografijama ili skicama. U eksperimentalnom dijelu ukratko je opisana CNC savijačica ‘TUBOTRON 50’ na kojoj je izvršeno savijanje cijevi prema tehničkom crtežu. Opisan je postupak pripreme obratka i stroja, te sve potrebne radnje za pravilno savijanje cijevi. Kroz nekoliko fotografija prikazan je tijek savijanja cijevi prema tehničkom crtežu i primjenu u praksi.
Abstract (english)
In the theoretical part of this thesis, properties of the material and bending strains are briefly described. Classification of the bending machines and their technical characteristics are described in more details. Classification is made with regard to bending material and type of bending. Each type of machine is described with photos or sketches and mode of operation. The experimental part briefly describes the CNC bending machine ‘TUBOTRON 50’ on which bending of pipe was made, according to the technical drawing. The preparation procedure of bending material and machine are described with several photos, with all other necessary steps for proper bending of the pipe.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:620095
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-07-06 08:12:33