prikaz prve stranice dokumenta KONSTRUKCIJSKO LIJEPLJENJE METALA
Access restricted to students and staff of home institution
master's thesis
KONSTRUKCIJSKO LIJEPLJENJE METALA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:117717
Perković, Luka
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Perković, L. (2016). KONSTRUKCIJSKO LIJEPLJENJE METALA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:117717

Perković, Luka. "KONSTRUKCIJSKO LIJEPLJENJE METALA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:117717

Perković, Luka. "KONSTRUKCIJSKO LIJEPLJENJE METALA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:117717

Perković, L. (2016). 'KONSTRUKCIJSKO LIJEPLJENJE METALA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:117717

Perković L. KONSTRUKCIJSKO LIJEPLJENJE METALA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:117717

L. Perković, "KONSTRUKCIJSKO LIJEPLJENJE METALA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:117717

Metadata
TitleKONSTRUKCIJSKO LIJEPLJENJE METALA
Title (english)METAL STRUCTURAL BONDING
AuthorLuka Perković
MentorPero Raos (mentor)
Committee memberPero Raos (član povjerenstva)
Committee memberZlatko Tonković (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom dijelu rada opisana je povijest tehnologije lijepljenja kao jednog od sveprisutnih postupaka suvremenih načina spajanja dijelova, te neki postupci nerastavljivog spajanja kao što su: zavarivanje, zakivanje i lemljenje. Zatim je detaljno opisan izbor ljepila i tehnologija lijepljenja koja se sastoji od pripreme i nanošenja ljepila, sastavljanja spoja i očvršćivanja ljepila. Na kraju teorijskog dijela rada analizirani su i detaljno opisani faktori koji utječu na čvrstoću lijepljenog spoja. Cilj eksperimenta je bio odrediti utjecaj pojedinih faktora na čvrstoću lijepljenih spojeva koji se sastoje od istog materijala, s različitim duljinama preklopa, različitim stanjem površine i lijepljenim s dva različita ljepila. Provedeno je statičko ispitivanje prekidne sile lijepljenog spoja ispitnih tijela, te na osnovu dobivenih podataka donesen je zaključak o utjecaju pojedinih faktora na čvrstoću lijepljenog spoja.
Abstract (english)
This paper in the first part describes the history of adhesive technology as one of the modern methods to connect parts and some technology, which cannot be separated such as: welding, riveting and brazing. Then this paper describe the selection of adhesive and bonding technology which consists of preparing and applying the adhesive and inurement of the adhesive compound. End of the theoretical part of the work describe in detail the factors that affect the strength of the bonded joint. The aim of the experiment was to determine the influence of certain factors on the strength of adhesively bonded joints which consist of the same material, with different lengths of overlap, different surface conditions and bonding with the two different adhesives. Based on the data obtained from the experiment is possible to conclude on the impact of certain factors on the strength of the bonded joint.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:117717
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-07-15 10:34:38