prikaz prve stranice dokumenta ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA
Access restricted to students and staff of home institution
master's thesis
ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:343091
Stepić, Mladen
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Stepić, M. (2018). ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:343091

Stepić, Mladen. "ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:343091

Stepić, Mladen. "ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:343091

Stepić, M. (2018). 'ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:343091

Stepić M. ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:343091

M. Stepić, "ROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:343091

Metadata
TitleROBOTSKO ZAVARIVANJE GLAVNOG POPREČNOG NOSAČA VAGONA
Title (english)Robotic welding of the main transverse wagon carrier
AuthorMladen Stepić
MentorIvan Samardžić (mentor)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberLeon Maglić (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-07-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je prikazan cjelokupan proces nastanka glavnog poprečnog nosača vagona u proizvodnom pogonu ĐĐ SPECIJALNA VOZILA. Opisani su elementi i glavne radnje koje su obavljene kako bi se dobio kvalitetan gotovi proizvod, u ovom slučaju poprečni nosač vagona. Najvažniji dio procesa koji se provodi tokom izrade nosača je robotsko zavarivanje MAG postupkom, čija primjena je doprinijela veću učinkovitost na cjelokupni proizvodni proces. Upravo iz tog razloga se glavna riječ vodi o robotskom zavarivanju i njegovom utjecaju na povećanje efikasnosti, te sve veća primjena ove vrste zavarivanja u strojarstvu i industriji općenito.
Abstract (english)
This paper presents the overall process of forming the main transporter wagon in the production plant of ĐĐ SPECIJALNA VOZILA. It describes the elements and main actions performed to obtain a good-quality finished product, in this case the transverse wagon carrier. The most important part of the process carried out during the production of the carrier is robotic welding, whose application has contributed to greater efficiency in the entire production process. For this reason, the main word is about robotic welding and its impact on increasing efficiency, but also the increasing use of this type of welding in mechanical engineering and industry in general.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:343091
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-07-17 07:01:22