prikaz prve stranice dokumenta UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA
Access restricted to students and staff of home institution
master's thesis
UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:645903
Katavić, Nikola
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Katavić, N. (2016). UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:645903

Katavić, Nikola. "UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:645903

Katavić, Nikola. "UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:645903

Katavić, N. (2016). 'UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 11 July 2024, https://urn.nsk.hr/urn:nbn:hr:153:645903

Katavić N. UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 July 11] Available at: https://urn.nsk.hr/urn:nbn:hr:153:645903

N. Katavić, "UTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:645903

Metadata
TitleUTJECAJ STANJA POVRŠINE NA SVOJSTVA LIJEPLJENOG SPOJA
Title (english)INFLUENCE OF SURFACE CONDITIONS ON PROPERTIES OF BONDED JOINT
AuthorNikola Katavić
MentorPero Raos (mentor)
Committee memberPero Raos (član povjerenstva)
Committee memberZlatko Tonković (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnome dijelu opisana je kratko povijest razvoja tehnologije lijepljenja, potom su kratko opisani pojedini postupci nerastavljivih spojeva zajedno s njihovim prednostima i nedostacima. Detaljno je razrađena tehnologija lijepljenja u kojemu je sadržana definicija i pravilno izvođenje načina lijepljenja. Sadržana je temeljna klasifikacija ljepila, izbor ljepila, vrste ljepila te utjecajni faktori na sami izbor ljepila. U radu se nalaze mehanizam očvršćivanja, način pravilnog oblikovanja lijepljenih spojeva, usporedbe lijepljenih spojeva s ostalim postupcima spajanja te su sadržani troškovi lijepljenih spojeva. Na kraju teorijskoga dijela nalazi se detaljni opisi utjecajnih faktora na čvrstoću lijepljenog spoja te priprema površine za provođenje postupka lijepljenja. Eksperimentalni dio rada proveden je s ciljem pokazivanja utjecaja stanja površine na čvrstoću lijepljenog spoja. U završnome dijelu donesen je zaključak na temelju dobivenih rezultata o utjecaju pripremljene površine na odabranim materijalima.
Abstract (english)
In the introduction can be found a short description about the history of development of the adhesive technology, after that comes a write up about some procedures of permanent joints and their advantages and disadvantages. Adhesive technology is detailed written and contains the definition and the correct method of adhesive bonding. Basic classification of adhesives, choice of adhesive, types of adhesives and the influencing factors on the choice of adhesive are also included. In the work can also be found the curing mechanism, ways of the correct shaping of adhesively bonded joints, comparison of adhesively bonded joints with other ways of bonding procedures and there are also the expenses of adhesively bonded joints. At the end of the theoretical part are the more detailed descriptions about the influencing factors on the strength of the adhesive bonded joints and the surface preparation for the gluing procedure. The experimental part was aimed to show the influence of the surface condition on the strength of the adhesively bonded joint. In the final part the conclusion is made based on the results about the influence of the surface preparation on selected materials.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:645903
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-07-15 10:46:42