prikaz prve stranice dokumenta TOPLINSKA OBRADA ZAVARENIH SPOJEVA
Access restricted to students and staff of home institution
master's thesis
TOPLINSKA OBRADA ZAVARENIH SPOJEVA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:443691
Bodrožić, Hrvoje
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Bodrožić, H. (2018). TOPLINSKA OBRADA ZAVARENIH SPOJEVA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:443691

Bodrožić, Hrvoje. "TOPLINSKA OBRADA ZAVARENIH SPOJEVA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:443691

Bodrožić, Hrvoje. "TOPLINSKA OBRADA ZAVARENIH SPOJEVA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:443691

Bodrožić, H. (2018). 'TOPLINSKA OBRADA ZAVARENIH SPOJEVA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:443691

Bodrožić H. TOPLINSKA OBRADA ZAVARENIH SPOJEVA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:443691

H. Bodrožić, "TOPLINSKA OBRADA ZAVARENIH SPOJEVA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:443691

Metadata
TitleTOPLINSKA OBRADA ZAVARENIH SPOJEVA
Title (english)HEAT TREATMENT OF WELDING JOINTS
AuthorHrvoje Bodrožić
MentorIvan Samardžić (mentor)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberLeon Maglić (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-06, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu analizirana je tema toplinska obrada zavarenih spojeva za čelike koje se koriste u kotlogradnji. Radom je obuhvaćen opis postupaka toplinskih obrada kao što su: žarenje za redukciju zaostalih naprezanja, normalizacijsko žarenje, poboljšavanje, rastvorno žarenje (gašenje), i predgrijavnje. Uz navedene postupke toplinske obrade obuhvaćen je opis: ugljičnih nelegiranih čelika, mikrolegirani i niskolegirani finozrnati visokočvrsti čelici, legirani Mo, CrMo i CrMoV čelici, CrNi austenitni nehrđajući čelici i visoko legirani Cr čelici martenzitnog i feritnog tipa, i još dodatno su opisani martenzitni čelici otporni na puzanje P91 i P92. Toplinska obrada zavarenih spojeva provodi se s ciljem vraćanja osnovnih (ili postizanja boljih) svojstava metala koja su promijenjena zavarivanjem.
Abstract (english)
In this master thesis the topic of heat treatment of welded joints for steel used in boating is analyzed. The paper describes a description of heat treatment processes such as: reduction of residual stress reduction, normalization, improvement, solenoid, and preheating. In addition to the above mentioned heat treatment processes, description is made of: carbon non-alloyed steels, micro-alloyed and low-alloy finishing high strength steels, bonded Mo, CrMo and CrMoV steels, CrNi austenitic stainless steels and high alloyed Cr steels of martensitic and ferrite type, and further described martensitic resisting steels on the crawl of P91 and P92. Thermal welding of welded joints is carried out with the aim of restoring the basic (or achieving better) metal properties that has been changed by welding.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:443691
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-10 05:45:49