prikaz prve stranice dokumenta OTPLINJAVANJE ALUMINIJSKIH LEGURA
Access restricted to students and staff of home institution
undergraduate thesis
OTPLINJAVANJE ALUMINIJSKIH LEGURA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:537058
Komar, Mihael
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Komar, M. (2018). OTPLINJAVANJE ALUMINIJSKIH LEGURA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:537058

Komar, Mihael. "OTPLINJAVANJE ALUMINIJSKIH LEGURA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:537058

Komar, Mihael. "OTPLINJAVANJE ALUMINIJSKIH LEGURA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:537058

Komar, M. (2018). 'OTPLINJAVANJE ALUMINIJSKIH LEGURA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 21 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:537058

Komar M. OTPLINJAVANJE ALUMINIJSKIH LEGURA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 December 21] Available at: https://urn.nsk.hr/urn:nbn:hr:153:537058

M. Komar, "OTPLINJAVANJE ALUMINIJSKIH LEGURA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:537058

Metadata
TitleOTPLINJAVANJE ALUMINIJSKIH LEGURA
Title (english)Degassing aluminum alloys
AuthorMihael Komar
MentorDaniel Novoselović (mentor)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U početku rada opisano je općenito o aluminiju i aluminijskim legurama, kako dobivamo aluminij, koja je njegova ruda i gdje se i za što najčešće upotrebljava. Nešto slično opisane su i legure aluminija, navedeni su neki od primjera aluminijskih legura i dani su dijagrami stanja aluminijskih legura te su objašnjena njihova svojstva. Nakon toga opisano je otapanje plinova u aluminijskim legurama i poroznosti koje se javljaju u materijalu zbog plinova, opisane su i mjere koje se poduzimaju prilikom lijevanja aluminija kako bi se smanjile poroznosti u materijalu. Za kraj je detaljno opisan postupak otplinjavanja aluminijskih legura lopatičastim rotorom, a nakon toga su opisana ispitivanja nedostataka takvog otplinjavanja i navedeni njihovi nedostaci.
Abstract (english)
The work is composed of several sections, and each of these units is described in more detail in the work. Initially described in general of aluminum and aluminum alloys, so that we get aluminum, which is its ore, important figures related to the aluminum itself and where it is and what the most commonly used. Something similar is described and aluminum alloys, are listed some examples of aluminum alloys and rose to the diagrams of aluminum alloys under which they explained their properties. Then described the dissolution of gases in aluminum alloy and porosity occurring in the material for gases, are described and the measures taken during the casting of aluminum to reduce the porosity of the material. For the end of the degassing step through the process of aluminum alloy lobed rotor, after which the described disadvantages of such tests and said degassing their disadvantages.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:537058
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-12 06:15:08