prikaz prve stranice dokumenta PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG
Access restricted to students and staff of home institution
master's thesis
PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:236687
Gunčević, Filip
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Gunčević, F. (2018). PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:236687

Gunčević, Filip. "PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:236687

Gunčević, Filip. "PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:236687

Gunčević, F. (2018). 'PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:236687

Gunčević F. PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:153:236687

F. Gunčević, "PRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:236687

Metadata
TitlePRORAČUN I KONSTRUKCIJA KOMBINIRANOG ALATA ZA ŠTANCANJE I SAVIJANJE PREMA TEHNIČKOM CRTEŽU PR_2018_FG
Title (english)CALCULATION AND CONSTRUCTION OF STAMPING AND BENDING COMBINED TOOL FOR PRODUCT GIVER BY TECHNICAL DRAWING PR_2018_FG
AuthorFilip Gunčević
MentorJosip Cumin (mentor)
Committee memberJosip Cumin (član povjerenstva)
Committee memberDaniel Novoselović (predsjednik povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-07, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovog diplomskog rada je proračun i konstrukcija kombiniranog alata koji istovremeno vrši proces prosijecanja, probijanja, savijanja i odsijecanja. Ovdje je prikazan i detaljno objašnjen postupak proračuna i konstruiranja svih alata koji su spojeni u jednu cjelinu, te tako obavljaju svoju funkciju. Na osnovu rezultata dobivenih proračunima sila i naprezanja provodi se konstrukcija i dimenzioniranje kombiniranog alata za štancanje i savijanje koji se sastoji od više sastavnih dijelova. Za svaki dio postoji nekoliko konstrukcijskih izvedbi te je potrebno odabrati optimalnu. Sastavni dijelovi prikazani su crtežom, a bitno je izraditi što precizniji alat sa što manjim troškovima. Također, usporedbom mogućih tehnologija izrade zadanog komada objašnjeno je zašto se kombinirani alat isplati izraditi u odnosu na druge tehnologije.
Abstract (english)
The aim of this graduate thesis is calculation and construction of a combined tool which simultaneously performs the process of slicing, punching, bending and cutting. Here, a detailed method is shown of calculation and construction all the tool elements that will be connected to one unit at a later time. Based on the results of the calculations of force and stresses, the construction and dimensioning of the combined punching and bending tool consists of several components. For each part there are several constructional designs and it is necesary to make optimal choise. The components are shown in the drawing, and it is essential to make the most accurate tool with the lowest cost. Also, by comparing the possible technology of making a default piece, it is explained why the combo tool is worth making compared to other technologies.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:236687
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-13 07:15:21