prikaz prve stranice dokumenta UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA
Access restricted to students and staff of home institution
master's thesis
UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:186380
Prihoda, Leonardo
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Prihoda, L. (2018). UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:186380

Prihoda, Leonardo. "UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:186380

Prihoda, Leonardo. "UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:186380

Prihoda, L. (2018). 'UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 16 June 2024, https://urn.nsk.hr/urn:nbn:hr:153:186380

Prihoda L. UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 June 16] Available at: https://urn.nsk.hr/urn:nbn:hr:153:186380

L. Prihoda, "UTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:186380

Metadata
TitleUTJECAJ PARAMETARA NA ČVRSTOĆU LIJEPLJENOG SPOJA
Title (english)INFLUENCE OF BONDING PARAMETERS ON BONDING JOINT STRENGTH
AuthorLeonardo Prihoda
MentorPero Raos (mentor)
Committee memberPero Raos (član povjerenstva)
Committee memberJosip Stojšić (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu opisane su teorijske osnove, podjela ljepila, izbor ljepila, prednosti i nedostaci lijepljenih spojeva i primjena lijepljenih spojeva. Opisana je tehnologija lijepljenja koja uključuje pripremu površine, lijepljenje, sastavljanje spoja, ispitivanje i kontrolu kvalitete. Detaljno su opisani utjecajni faktori na čvrstoću lijepljenog spoja: svojstva sloja ljepila, svojstva materijala, oblikovanje i opterećenje spoja. U eksperimentalnom dijelu rada provedeno je ispitivanje ispitnih tijela prema normi ISO 4587. Ispitna tijela su bila pripremljena, lijepljena i nakon toga ispitivana na univerzalnom uređaju za mjerenje rasteznih svojstava. Korištene su dvije vrste materijala i tri vrste ljepila. Rezultati ispitivanja su prikazivali maksimalnu silu i maksimalno naprezanje tijekom kidanja ispitnih tijela. Analizom rezultata zaključilo se kako vrsta ljepila i vrsta materijala imaju znatan utjecaj na čvrstoću lijepljenog spoja.
Abstract (english)
In this master thesis, theoretical basics, adhesive separation, glue selection, advantages and disadvantages of bonded joints and application of bonded compounds have been described. Bonding technology is described, which includes surface preparation, bonding, assembly, testing and quality control. The influence factors on the strength of the bonded compound are described in detail: the properties of the adhesive layer, the properties of the material, the shape and the load of the compound. In the experimental part of the work, the test bodies were tested according to ISO 4587. The test bodies were prepared, glued and then tested on the testing machine. Two types of material and three types of glue were used. The test results showed the maximum force and maximum strain during the tensile test. Analysis of the result concluded that the type of material have a significant effect on the strength of the bonded compound.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:186380
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-13 08:10:48