prikaz prve stranice dokumenta ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE
Access restricted to students and staff of home institution
undergraduate thesis
ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:698681
Ivanek, Krešimir
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Ivanek, K. (2018). ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:698681

Ivanek, Krešimir. "ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:698681

Ivanek, Krešimir. "ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:698681

Ivanek, K. (2018). 'ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:698681

Ivanek K. ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:698681

K. Ivanek, "ANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:698681

Metadata
TitleANALIZA NAPREZANJA I DIMENZIONIRANJE NOSAČA OPTEREĆENIH NA SAVIJANJE
Title (english)STRESS ANALYSIS AND DIMENSIONING OF BEAMS SUBJECTED TO BENDING
AuthorKrešimir Ivanek
MentorDražan Kozak (mentor)
Committee memberDražan Kozak (član povjerenstva)
Committee memberDarko Damjanović (član povjerenstva)
Committee memberVjekoslav Šimunović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U teorijskom dijelu rada obrađena je podjela savijanja ovisna o vrsti vanjskog opterećenja te su izvedeni izrazi potrebni za matematičku analizu savijanja nosača. Opisan je način na koji se dolazi do izraza za računanje deformacija i naprezanja kod pojedinog tipa opterećenja na savijanje te raspodjela naprezanja kod različitih oblika poprečnih presjeka nosača. Pokazano je kako dobivamo optimalan oblik poprečnog presjeka. Vezano za dimenzioniranje i određivanje dopuštenih naprezanja, navedeni su uvjeti čvrstoće koji se moraju zadovoljiti proračunom. Primjerima zadataka nadovezuje se na teorijski dio dimenzioniranja nosača te određivanja naprezanja. Dijagramima i proračunom je prikazana raspodjela naprezanja te unutrašnjih sila u nosaču.
Abstract (english)
In the theoretical part of the paper, the bending classification was studied depending on the type of external load and the terms used for the mathematical analysis of bending were derived. Way of calculating strain and stress is described for certain types of bending loads and distribution of stress is shown for different types of cross-sections of the carrier. It is shown how we obtain an optimal cross-sectional shape. With regard to dimensioning and determination of permitted strains, strength conditions are specified which must be met by the calculations. Task examples are based on the theoretical part of the carrier dimensioning and the stress determination. Diagrams and calculations show the distribution of stress and inner forces in the beams.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:698681
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-13 10:49:12