prikaz prve stranice dokumenta Izrada vatrostalne obloge u peći za taljenje
Access restricted to students and staff of home institution
master's thesis
Izrada vatrostalne obloge u peći za taljenje
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:284406
Lučan, Antonio
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Lučan, A. (2018). Izrada vatrostalne obloge u peći za taljenje (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:284406

Lučan, Antonio. "Izrada vatrostalne obloge u peći za taljenje." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:284406

Lučan, Antonio. "Izrada vatrostalne obloge u peći za taljenje." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:284406

Lučan, A. (2018). 'Izrada vatrostalne obloge u peći za taljenje', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:284406

Lučan A. Izrada vatrostalne obloge u peći za taljenje [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 December 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:284406

A. Lučan, "Izrada vatrostalne obloge u peći za taljenje", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:284406

Metadata
TitleIzrada vatrostalne obloge u peći za taljenje
Title (english)MAKING A REFRACTORY LINING IN A GLASS MELTING FURNACE
AuthorAntonio Lučan
MentorDaniel Novoselović (mentor)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Stojšić (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu analizirana je tema izrada vatrostalne obloge u peći za taljenje stakla. Staklo je jedan od najvažnijih materijala koji se koristi u svakodnevnom životu. Osnovni cilj je poboljšati kvalitetu stakla te da se poveća recikliranje stakla, stoga je puno pažnje posvećeno očuvanju energije i samom utjecaju peći za taljenje na okoliš. Radom je obuhvaćen proces izrade stakla te način primjene i ugradnje vatrostalne obloge u peći za taljenje stakla. Prikazani su neki od načina izrade stakla u kalupima. Radi boljeg približavanja teme izrađen je i 3D model u programu Autodesk Inventor Professional 2016. Pomoću modela prikazano je u kojem se području koristi koji materijal i kojeg je sastava što mu omogućava izdržavanje ekstremnih temperatura. Provedena je i usporedba materijala koji se ugrađuju u peć. U ovom diplomskom radu predstavljena su neka od tih rješenja.
Abstract (english)
Master thesis analyses the topic of making a refractory lining in a glass melting furnace. Glass is one of the most important materials used in everyday life. The main goal is to improve glass quality and to increase glass recycling, so a lot of attention is devoted to preserving the energy and what impact of the glass melting furnace had on the environment. The work involved in the process of making glass and the way of applying and installing refractory material in the glass melting furnace. Some of the ways of molding glass are also shown in this master thesis. For a better view of the subject, 3D model was developed in Autodesk Inventor Professional 2016. The model shows the area in which the material is used and from whom he is composed, what enables it to withstand high temperatures. There is also shown a comparison of the material which was built in the furnace. In this master thesis some of those solutions are presented.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:284406
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-21 08:41:42