prikaz prve stranice dokumenta SIMULACIJA PROCESA OBRADE TOKARENJEM
Access restricted to students and staff of home institution
master's thesis
SIMULACIJA PROCESA OBRADE TOKARENJEM
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:446174
Mikulić, Ivan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Mikulić, I. (2018). SIMULACIJA PROCESA OBRADE TOKARENJEM (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:446174

Mikulić, Ivan. "SIMULACIJA PROCESA OBRADE TOKARENJEM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:446174

Mikulić, Ivan. "SIMULACIJA PROCESA OBRADE TOKARENJEM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:446174

Mikulić, I. (2018). 'SIMULACIJA PROCESA OBRADE TOKARENJEM', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:446174

Mikulić I. SIMULACIJA PROCESA OBRADE TOKARENJEM [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:446174

I. Mikulić, "SIMULACIJA PROCESA OBRADE TOKARENJEM", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:446174

Metadata
TitleSIMULACIJA PROCESA OBRADE TOKARENJEM
AuthorIvan Mikulić
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberPejo Konjatić (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U teorijskom dijelu rada opisane su CAD i CAM tehnologije, njihova povijest i tijek razvoja. Kao primjer za svaku od tehnologija naveden je jedan softver i detaljnije opisan. Pomoću CAD i CAM sustava provedena je simulacija opterećenja i naprezanja držača alatne pločice prilikom tokarenja. Držač koji je u radu korišten za simulacije identičan je onomu koji se nalazi u laboratoriju Strojarskog fakulteta u Slavonskom Brodu. Zadatkom je trebalo modelirati držač zajedno sa alatnom pločicom u CAD sustavu. Zatim u CAM sustavu opteretiti model realnim silama koje se pojavljuju tijekom tokarenja. Prikazani su rezultati sveukupnih deformacija i naprezanja na modelu u nekoliko različitih uvjeta simulacije. Zadatak je proveden kako bi se vrijednosti dobivene simulacijom usporedile sa stvarnim vrijednostima izmjerenim tijekom procesa.
Abstract (english)
The theoretical part of the thesis describes the CAD and CAM tehnology, its history and moments of developing. As example are mentioned one software for each of tehnology with more details. With CAD and CAM softwares is made simulation of deformations and stress of holder for tool insert during turning. Holder witch is used for simulation is identical to one witch is locateted in Mechanical Engineering Faculty in Slavonski Brod. The task was to make model of holder together with tool insert in CAD software. Then, in CAM softvare put the real forces witch are showing during turning on model. Results for total deformations and stress are shown in paper for few cases of simulation. The simulations are made so resuts can be compared with results messured during real proces of turning.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:446174
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-21 09:31:38