prikaz prve stranice dokumenta ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA
Access restricted to students and staff of home institution
master's thesis
ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:472989
Aušić, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Aušić, T. (2018). ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:472989

Aušić, Tomislav. "ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:472989

Aušić, Tomislav. "ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:472989

Aušić, T. (2018). 'ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 28 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:472989

Aušić T. ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 December 28] Available at: https://urn.nsk.hr/urn:nbn:hr:153:472989

T. Aušić, "ANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:472989

Metadata
TitleANALIZA ZAMORA KOD DRENAŽNIH CJEVOVODA PARNOG KOTLA
Title (english)FATIGUE ANALYSIS OF STEAM BOILER DRAINAGE PIPELINE
AuthorTomislav Aušić
MentorPejo Konjatić (mentor)
Committee memberPejo Konjatić (član povjerenstva)
Committee memberFranjo Matejiček (predsjednik povjerenstva)
Committee memberMirko Karakašić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu prikazan je proračun zamora drenažnih cijevi spalionice smeća. Drenažne cijevi ciklički su opterećene udarom trna koji skida pepeo sa izmjenjivača topline na kojima se nalaze drenažne cijevi. Cijevi su opterećene i tlakom unutar njih. Proračun je proveden za odabrane kritične presjeke pojedinih cijevi koje su opterećene na dva načina, Step A i Step B. Također je prikazana izrada modela u programu Abaqus/CAE 2016. Prikaz rezultata nalazi se u prilozima. Proračun je proveden kombinirajući dvije norme, EN 12952-3:2012-03 i EN 13445-3:2009 te se ovisno o njima donosi zaključak o zamornoj čvrstoći drenažnih cijevi.
Abstract (english)
This paper presents fatigue calculation of drain pipes of the waste incineration installations. The drain pipes are cyclicly loaded with a thorn impact that drains the ashes from the heat exchanger on which drain pipes are located. Tubes are loaded with internal pressure also. The calculation was made for the critical cross-sections of the individual pipes loaded in two ways, Step A and Step B. The Abaqus / CAE 2016 model is also presented. The results are presented in the appendices of this paper. The calculation was carried out by combining the two standards, EN 12952-3: 2012-03 and EN 13445-3: 2009, and depending on them, conclusion is given in relation to resistant fatigue strength of drain pipes.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:472989
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-28 06:10:37