prikaz prve stranice dokumenta IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM
Access restricted to students and staff of home institution
master's thesis
IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:702853
Pekez, Bruno
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Pekez, B. (2018). IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:702853

Pekez, Bruno. "IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:702853

Pekez, Bruno. "IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:702853

Pekez, B. (2018). 'IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:702853

Pekez B. IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:702853

B. Pekez, "IZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:702853

Metadata
TitleIZRADA POLIMERNIH KOMPOZITA INJEKCIJSKIM PREŠANJEM
Title (english)INJECTION MOLDING OF POLYMER COMPOSITES
AuthorBruno Pekez
MentorPero Raos (mentor)
Committee memberPero Raos (član povjerenstva)
Committee memberJosip Stojšić (predsjednik povjerenstva)
Committee memberAndrijana Milinović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu predočena je potreba čovjeka za polimernim kompozitima u gotovo svim aspektima života. Ukratko su opisani polimerni materijali, objašnjena je proizvodnja sintetskih polimera te polimerizacija. Prikazane su molekularna i nadmolekularna struktura polimera kao faktori koji imaju veliki utjecaj na njihova svojstva. Napravljena je klasifikacija polimera prema ponašanju na povišenim temperaturama te su opisani plastomeri, duromeri i elastomeri. Zatim je objašnjen pojam kompozita i prikazana je njihova struktura. Detaljno su opisani kompoziti s polimernom matricom i vrste ojačala koje se najčešće koriste pri njihovoj izradi. Opisano je injekcijsko prešanje kao najviše korišten postupak cikličkog praoblikovanja polimera i polimernih kompozita. Prikazana je linija za injekcijsko prešanje i njezini osnovni elementi te su nabrojane i objašnjene najčešće inačice za injekcijsko prešanje kompozita. U završnom dijelu diplomskog rada navedena su mnoga područja primjene injekcijski prešanih kompozita čime se pokazuje važnost ove vrste materijala u životu čovjeka.
Abstract (english)
This graduate thesis presents humanity’s need of polymer composites in almost all aspects of life. Polymer materials have been described, as well as synthesis procedure and definition of polymerization. Molecular and super-molecular structures of polymer are shown to be factors with great influence on polymers mechanical and other properties. Classifications of polymers were described, with emphasis on classification based on their behavior at elevated temperatures. Structure and properties of thermoplastic, thermosetting and elastomer are described. Furthermore, concept of composite is explained and their structure presented. Detailed description of the composites with polymer matrix has been given as well as the types of reinforcements most commonly used in manufacture. Injection molding is described as the most widely used method of cyclic polymer and polymer composite rendering. The injection molding line and its basic elements are shown, and the most common types of injection molding are listed and explained. In the final part of the graduate thesis many areas of application are described that use injection molded polymer composites, which shows the importance of this kind of material in man’s industry and disadvantages are described. In the final part of the graduate thesis, the materials used in these mold making technologies are also described.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:702853
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-09-28 08:56:37