prikaz prve stranice dokumenta PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU
Access restricted to students and staff of home institution
master's thesis
PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:696626
Župan, Veronika
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Župan, V. (2018). PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:696626

Župan, Veronika. "PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:696626

Župan, Veronika. "PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:696626

Župan, V. (2018). 'PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:696626

Župan V. PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:696626

V. Župan, "PROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:696626

Metadata
TitlePROJEKTIRANJE TEHNOLOŠKOG PROCESA U CAD/CAM SOFTVERU
Title (english)PROCESS PLANNING IN CAD / CAM SOFTWARE
AuthorVeronika Župan
MentorGoran Šimunović (mentor)
Committee memberGoran Šimunović (član povjerenstva)
Committee memberTomislav Šarić (predsjednik povjerenstva)
Committee memberKatica Šimunović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema diplomskog rada je Projektiranje tehnološkog procesa u CAD/CAM softveru. U teorijskom dijelu opisana je računalom podržana tehnološka priprema proizvodnje, njeno stanje na tržištu te dostupnost i prihvatljivost CAD/CAM softvera. U eksperimentalnom dijelu diplomskog rada projektiran je tehnološki proces izrade radnog predmeta uz pomoć CAD/CAM softvera Siemens NX11. Pomoću navedenog softvera za svaki tehnološki zahvat kreiran je alat te njegova putanja, a zatim pokrenuta simulacija. Softver NX11 kao krajnji rezultat, između ostalog, nudi i popratnu tehnološku dokumentaciju te G-kod koji služi za izrada predmeta na numerički upravljanim strojevima (NC). Radni predmet za koji je projektiran tehnološki proces je složenog geometrijskog oblika.
Abstract (english)
The theme of the graduate thesis is Designing the technological process in the CAD / CAM software. In the theoretical part, the computer is supported by the technological preparation of production, its market situation and the availability and acceptability of CAD / CAM software. In the experimental part of the graduate thesis, the technological process of working with the CAD / CAM software Siemens NX11 was designed. With the software listed for each technological engagement, a tool was created and its path followed by a simulation. The NX11 software as an end result, among other things, also offers the required technological documentation and the G-code used to produce objects on numerically controlled machines (NC). The work object for which the technological process is designed is of a complex geometric shape.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:696626
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-10-03 09:18:35