prikaz prve stranice dokumenta OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA
Access restricted to students and staff of home institution
master's thesis
OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. urn:nbn:hr:153:270796
Vrbić, Ivan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Vrbić, I. (2018). OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:270796

Vrbić, Ivan. "OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:270796

Vrbić, Ivan. "OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2018. https://urn.nsk.hr/urn:nbn:hr:153:270796

Vrbić, I. (2018). 'OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:270796

Vrbić I. OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2018 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:153:270796

I. Vrbić, "OBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:153:270796

Metadata
TitleOBLIKOVANJE TEHNOLOŠKOG PROCESA I IZRADA ZUPČASTE PUMPE UPORABOM CAD/CAM SUSTAVA
Title (english)DESIGN OF THE TECHNOLOGICAL PROCESS AND PRODUCTION GEAR PUMP USING CAD/CAM SYSTEM
AuthorIvan Vrbić
MentorTomislav Šarić (mentor)
Committee memberTomislav Šarić (član povjerenstva)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberRoberto Lujić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2018-09-25, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu opisano je oblikovanje tehnološkog procesa i način izrade zupčaste pumpe uporabom CAD/CAM sustava. Prvi dio rada je teorijski dio i sastoji se od uvoda. Kratko je opisano mjesto i uloga CAD/CAM sustava u suvremenim proizvodnim poduzećima sa najbitnijim značajkama, zatim su opisani uobičajeni obradni sustavi gdje su dane potrebne informacije za programiranje CNC strojeva. U drugom dijelu rada, koji je eksperimentalni dio, prema sklopnom crtežu zupčaste pumpe oblikovane su pozicije u CAD programskom paketu Siemens NX 11 te je generirana potrebna tehnička dokumentacija. Zatim je, pomoću odabranog CAM programskog paketa Simens NX 11 i prethodno generirane tehničke dokumentacije, izrađen tehnološki proces za izradu pozicija odabranog modela. Nakon toga su za edukacijske strojeve EMCO PC MILL 105 i EMCO TURN 105 definirane potrebne aktivnosti pripreme i izrade definiranih elemenata. Završni dio rada je zaključak gdje su analizirane mogućnosti odabranog CAD/CAM sustava.
Abstract (english)
In this graduate work was described a construction of the tehnological process of the pumps production by using CAD/CAM system. The first part of this work is a theoretical part. Theoretical part is consisted of the introduction and it is also briefly described the place and the role of CAD/CAM system in modern manufacturing companies with the most important features, followed by conventional machining systems where CNC programming information is given. The second part is experimental part according to circuit diagram of gear pump where are designed positions in CAD software package Siemens NX 11 and the required technical documentation was generated. Then, using the selected Simens NX 11 software package and the previously generated technical documentation technological process was created for the position of the selected model. After that, the EMCO PC MILL 105 and EMCO TURN 105 training machines have defined the necessary activities for preparing and developing the defined elements. The final part of the paper is a conclusion where the capabilities of the selected CAD / CAM system are analyzed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:270796
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2018-10-04 08:53:44