prikaz prve stranice dokumenta SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019
Access restricted to students and staff of home institution
master's thesis
SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:846013
Marković, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Marković, M. (2019). SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:846013

Marković, Marko. "SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:846013

Marković, Marko. "SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:846013

Marković, M. (2019). 'SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:846013

Marković M. SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:153:846013

M. Marković, "SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:846013

Metadata
TitleSIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI PREMA CRTEŽU KPP2/2019
Title (english)SIMULATION OF MOLD FLOW IN INJECTION MOLD CAVITY FOR MOLDED PART ACCORDING DRAWING NUMBER KPP2/2019
AuthorMarko Marković
MentorJosip Stojšić (mentor)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberJosip Cumin (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U diplomskom radu su ukratko opisani polimerni materijali, njihova podjela i svojstva te proces prerade injekcijskim prešanjem. Opisan je postupak injekcijskog prešanja te glavni elementi sustava za injekcijsko prešanje. U praktičnom dijelu rada, u programskom paketu SolidWorks konstruiran je proizvod po pravilima konstruiranja za injekcijski prešane proizvode koja su također objašnjena u radu. U posljednjem poglavlju rada, u programskom paketu Moldflow Adviser je izvršena računalna simulacija procesa injekcijskog prešanja za jedan plastomer kristalaste i jedan amorfne strukture za konstruirani proizvod. Na kraju je provedena simulacija punjenja kalupne šupljine te su rezultati prikazani numerički i grafički.
Abstract (english)
This paper briefly describes polymer materials, their classification and properties, and the process of polymer manufacturing by injection molding. The injection molding procedure and the main elements of the injection molding system are described. In the practical part of the paper, a product was constructed in the SolidWorks software according to the design rules for injection molded products that are also explained in the paper. In the last section of the paper, a computer simulation of the injection molding process was carried out in Moldflow Adviser software on the amorphous and crystalline structure for the constructed product. Finally, a simulation on filling the mold cavity was performed and the results were presented numerically and graphically.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:846013
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-07-17 05:35:13