prikaz prve stranice dokumenta KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019
Access restricted to students and staff of home institution
master's thesis
KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:543438
Rakocija, Filip
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Rakocija, F. (2019). KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:543438

Rakocija, Filip. "KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:543438

Rakocija, Filip. "KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:543438

Rakocija, F. (2019). 'KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:543438

Rakocija F. KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 December 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:543438

F. Rakocija, "KONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:543438

Metadata
TitleKONSTRUKCIJA ALATA ZA KOVANJE VANJSKE ČAHURE HOMOKINETIČKOG ZGLOBA D_FR_2019
Title (english)FORGING DIE CONSTRUCTION FOR PRODUCTION OF CV JOINT OUTER SHELL D_FR_2019
AuthorFilip Rakocija
MentorJosip Cumin (mentor)
Committee memberJosip Cumin (član povjerenstva)
Committee memberDaniel Novoselović (predsjednik povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U uvodnom dijelu ovoga rada dan je kratak opis teorije oblikovanja metala deformiranjem s osnovnim podjelama, te je opisan razvoj tehnologije kovanja kroz povijest i postotak primjene navedene tehnologije u vodećim svjetskim i europskim zemljama u proizvodnji otkivaka. Tehnologija kovanja u drugom dijelu rada je podijeljena na slobodno kovanje i kovanje u ukovnjima te je dan detaljan opis navedenih postupaka uz glavne prednosti i nedostatke. Također opisana su i navedena sva pravila i najvažniji procesi o kojima je potrebno voditi računa prilikom proračuna i konstrukcije otkivka koji je u ovom slučaju kućište homokinetičkog zgloba. Na kraju u zadnjem teorijskom dijelu ovoga rada navedeni su i opisani kovački strojevi i peči koji se mogu koristiti za izradu odnosno predgrijavanje navedenog otkivka. U posljednjem dijelu ovoga rada izvršen je proračun potrebnih gravura, stroja za kovanje, dimenzija ukovnja i ostalih potrebnih podataka, te je na osnovu njih izvršena konstrukcija alata za kovanje sa svim pripadajućim dijelovima.
Abstract (english)
In the introductory part of this work, a short description was given about a theory of forging steel using a deforming technique with it’s basic classification. This part also describes the development of the forging technique through history and the percentage of implementing these techniques in leading global and European countries in manufacturing forged steel. Technology of forging steel in the second part of this work is separated on free forging and die forging and a detailed description of these procedures is given with it’s main advantages and disadvantages. Likewise, all rules and most important processes are described which should be taken into account during the calculation and construction of forged product, which in this case is the housing of the homokinetic joint. In the last theoretical part of this work forging machines and ovens are mentioned and described which can be used to make or preheat the aforementioned forged steel. In the final part of this work, the calculation of the required gravure, forging machine, dimensions of the forging die and other necessary data was made and based on them the construction of a forging tool with all of it’s associated parts was carried out.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:543438
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-07-17 05:54:13