prikaz prve stranice dokumenta IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA
Access restricted to students and staff of home institution
master's thesis
IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:953720
Bošnjaković, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Bošnjaković, T. (2019). IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:953720

Bošnjaković, Tomislav. "IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:953720

Bošnjaković, Tomislav. "IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:953720

Bošnjaković, T. (2019). 'IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:953720

Bošnjaković T. IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:153:953720

T. Bošnjaković, "IZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:953720

Metadata
TitleIZRADA KALUPA ZA INJEKCIJSKO PREŠANJE ADITIVNIM TEHNOLOGIJAMA
Title (english)INJECTION MOLD MANUFACTURING BY ADITIVE TECHNOLOGIES
AuthorTomislav Bošnjaković
MentorJosip Stojšić (mentor)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberJosip Cumin (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-07-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu su opisani postupci aditivnih tehnologija. Aditivna proizvodnja nudi mnoge strateške prednosti, uključujući povećanu slobodu dizajna za izgradnju složenih unutarnjih i vanjskih geometrija dijelova, mogućnost konstrukcijskog poboljšavanja, manje troškove u odnosu na druge postupke izrade i slično. Analizirani su materijali koji se koriste za izradu kalupa i alata. U primjeni su metalni materijali kao što su: Al, Ti, Ni i sl. Za proizvodnju tvorevina koriste se polimerni materijali. U radu je sažeto opisan sustav za injekcijsko prešanje, a detaljnije je analiziran kalup za injekcijsko prešanje. Na kraju rada su dani i opisani primjeri primjene aditivnih tehnologija za izradu kalupa za injekcijsko prešanje.
Abstract (english)
The paper describes the methods of additive technologies. Additive production offers many strategic advantages, including increased freedom of design for the construction of complex interior and exterior geometry of parts, the possibility of structural improvement, lower costs compared to other manufacturing processes and the like. The materials used for making molds and tools have been analyzed. Metallic materials such as Al, Ti, Ni, etc. are in used. Polymer materials are used to produce products. In this paper, the injection molding system is described briefly and the mold for injection molding is analyzed in details. At the end of the work are given and described examples of application of additive technologies for making molds for injection molding.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:953720
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-07-17 06:02:47