prikaz prve stranice dokumenta INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA
Access restricted to students and staff of home institution
master's thesis
INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:315059
Šokčević, Adam
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Šokčević, A. (2019). INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:315059

Šokčević, Adam. "INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:315059

Šokčević, Adam. "INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:315059

Šokčević, A. (2019). 'INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 June 2024, https://urn.nsk.hr/urn:nbn:hr:153:315059

Šokčević A. INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 June 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:315059

A. Šokčević, "INJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:315059

Metadata
TitleINJEKCIJSKO PREŠANJE ŠUPLJIKAVIH OTPRESAKA
Title (english)INJECTION MOLDING OF PARTS WITH HOLLOWS
AuthorAdam Šokčević
MentorPero Raos (mentor)
Committee memberPero Raos (član povjerenstva)
Committee memberJosip Stojšić (predsjednik povjerenstva)
Committee memberAndrijana Milinović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-07-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad opisuje važnost injekcijskog prešanja šupljikavih otpresaka i razvoja njihovih postupaka. Ogromna količina polimera se prerađuje injekcijskim prešanjem svake godine. Velike količine novaca i znanja se ulažu u unapređivanje sustava za injekcijsko prešanje zbog svoje značajne uloge u današnjem potrošačkom svijetu. Mnogi su razlozi primjene novih metoda injekcijskog prešanja kao što je prešanje šupljikavih otpresaka , a neki od njih su smanjenje potrošnje materijala, škarta i energije dok se poboljšavaju svojstva poput specifične čvrstoće i izolacijskih svojstava. Manja masa uz ista svojstva je uvijek poželjna stavka koju ova tehnologija ispunjava. U ovom radu se opisuje proces injekcijskog prešanja te oprema koja je nužna za funkcioniranje ovog sustava. Na kraju se uspoređuju razne metode injekcijskog prešanja šupljikavih otpresaka koje su trenutno komercijalno raširene.
Abstract (english)
This paper describes the importance of injection molding of porous parts and development of these procedures. Huge amount of polymers is being processed by injection molding every year. Large amount of money and knowledge is invested in improving of injection molding systems due to its significant role in the present consumer world. Reasons for application of new methods of injection molding such as molding of porous parts are many, and some of them are reduction of material consumption, scrap and energy consumption while improving properties such as specific strength and insulation properties. Less mass with same properties is always a desirable item that this technology meets. In this paper is described process of injection molding and equipment necessary for the operation of this system. Finally, various methods of injection molding of porous parts are being compared, which are now commercially widespread.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:315059
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-07-18 07:07:33