prikaz prve stranice dokumenta "KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA"
Access restricted to students and staff of home institution
master's thesis
"KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA"
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:534861
Ikić, Tin
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Ikić, T. (2019). "KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA" (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:534861

Ikić, Tin. ""KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA"." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:534861

Ikić, Tin. ""KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA"." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:534861

Ikić, T. (2019). '"KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA"', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:534861

Ikić T. "KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA" [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:153:534861

T. Ikić, ""KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA"", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:534861

Metadata
Title"KONSTRUIRANJE I PRORAČUN NAPRAVE ZA OKRETANJE KUĆIŠTA"
Title (english)"DESIGN AND ANALYSIS OF DEVICE FOR ROTATING OF HOUSING"
AuthorTin Ikić
MentorDražan Kozak (mentor)
Committee memberDražan Kozak (član povjerenstva)
Committee memberMarinko Stojkov (predsjednik povjerenstva)
Committee memberMarko Katinić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-07-19, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Cilj je diplomskog rada konstruirati i proračunati napravu za okretanje. U uvodnom dijelu rada, predstavlja se problem podizanja i manipulacije teškim teretima. Nakon uvoda, slijedi prikaz naprava, njihova podjela, osnovne značajke i neke od mogućih izvedbi. Na početku glavnog dijela ovoga rada, prikazana su postojeća rješenja koja će biti korištena kao sustav informacija pri daljnjem razvoju proizvoda. Tijekom konceptualne faze bile su uzete u obzir sve smjernice i zahtjevi te je izabran konačni koncept. Zatim se pristupa modeliranju pojedinih pozicija pomoću programa SolidWorks 2016. Nakon što su izmodelirane pojedine pozicije, sklapaju se najprije u podsklopove, a zatim se podsklopovi povezuju u konačnu konstrukciju. Za numeričku analizu korištena je već ranije generirana geometrija, a cijela numerička analiza provedena je u softveru Ansys 17.0. Svakom je podsklopu provjereno maksimalno naprezanje i deformacija prema stvarnim uvjetima. U analizama su provedene i konvergencije rješenja ukupnih pomaka i ekvivalentnih naprezanja po von Misesu za različite veličine konačnih elemenata koje su prikazane tablicama i dijagramima. Zatim slijedi analitički proračun pogonskog sustava te ostalih komponenata naprave. U prilogu je dana radionička dokumentacija većine dijelova.
Abstract (english)
The goal of this Master's thesis was to construct and calculate an rotating device. In the preface of this paper, there is an introduction to the problem of handling heavy loads. After the introduction, there is a brief overview of material handling devices, their classification, basic features and possible construction. At the beginning of main part of this paper, existing solutions will be examined and used as an information system for further development of the product. During the conceptual design, all the guidelines and requirements were considered, and the final concept was chosen. The next step will be modelling of individual positions of the product made with SolidWorks 2016 computer programme. After certain positions have been modeled, they will be concluded in the first subassemblies, and then those subassemblies will be connected in the finished construction. Previously made geometry was used for numerical analysis in Ansys 17.0 software. Every subassembly will be checked for maximum stress and strain, based on real conditions. Convergence of solutions of total displacements and equivalent von Mises stresses for the different finite element sizes was also performed and shown in tables and diagrams. This is followed by analytical calculation of the drive mechanism and other device components. Work documentation for the most of the parts is attached.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:534861
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-07-19 11:16:50