prikaz prve stranice dokumenta TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA
Access restricted to students and staff of home institution
undergraduate thesis
TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. urn:nbn:hr:153:914465
Šoški, Nikola
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Šoški, N. (2016). TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:914465

Šoški, Nikola. "TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:914465

Šoški, Nikola. "TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2016. https://urn.nsk.hr/urn:nbn:hr:153:914465

Šoški, N. (2016). 'TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 07 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:914465

Šoški N. TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2016 [cited 2024 November 07] Available at: https://urn.nsk.hr/urn:nbn:hr:153:914465

N. Šoški, "TEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2016. Available at: https://urn.nsk.hr/urn:nbn:hr:153:914465

Metadata
TitleTEHNOLOŠKA PRIPREMA PROIZVODNJE U TVORNICI OPRUGA
Title (english)TECHNOLOGICAL PREPARATION OF PRODUCTION IN THE SPRING FACTORY
AuthorNikola Šoški
MentorGoran Šimunović (mentor)
Committee memberGoran Šimunović (član povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
Committee memberIlija Svalina (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2016-07-15, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je opisan značaj tehnološke pripreme proizvodnje, a u nastavku je projektiran i analiziran tehnološki proces za izabrani proizvod-oprugu tvrtke „ESCO-Fofonjka“ d.o.o.. Kod proizvodnje opruga tehnološka priprema je vrlo važan dio aktivnosti, međutim zbog velikog broja sličnih proizvoda ovom izabranom proizvodu, tehnološka priprema je ustaljeni slijed aktivnosti te ne predstavlja poteškoće tehnolozima u tvrtki. Kod projektiranja opruge je korišten iterativni pristup proračunavanja, kojim su određeni tehnički parametri opruge. Izabrani parametri su prihvaćeni kao optimalni iako bi postupak izbora optimalnih parametara trebao biti puno opsežniji i kompleksniji uz definirane kriterije i ciljeve. Kasnijom analizom je ustanovljeno da za polazni materijal-žicu od koje se izrađuje opruga, parametri zaista jesu optimalni s aspekta potrošnje materijala, proizvodnosti i zahtjeva kupca.
Abstract (english)
This paper describes the importance of technological preparation of production and below is designed and analyzed the technological process for the selected product-spring from company "ESCO Fofonjka" d.o.o.. In spring production, technological preparation is a very important part of the activities, however, due to large number of similar products to the chosen product, technological preparation is established sequence of activities and does not represent difficulties to technologists in this company. For design of the spring it was used an iterative approach of calculating, which defines the technical parameters of the spring. Selected parameters are accepted as optimal even though the process of selection of optimum parameters should be much broader and more complex with defined criteria and objectives. Subsequent analysis showed that for the starting material-wire used for making springs, parameters really are optimal in terms of material consumption, productivity and customer requirements.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:914465
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-08-31 12:12:12