prikaz prve stranice dokumenta POSTUPCI KALJENJA ČELIKA
Access restricted to students and staff of home institution
undergraduate thesis
POSTUPCI KALJENJA ČELIKA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:817790
Pršlja, Marin
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Pršlja, M. (2019). POSTUPCI KALJENJA ČELIKA (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:817790

Pršlja, Marin. "POSTUPCI KALJENJA ČELIKA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:817790

Pršlja, Marin. "POSTUPCI KALJENJA ČELIKA." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:817790

Pršlja, M. (2019). 'POSTUPCI KALJENJA ČELIKA', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 01 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:817790

Pršlja M. POSTUPCI KALJENJA ČELIKA [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 December 01] Available at: https://urn.nsk.hr/urn:nbn:hr:153:817790

M. Pršlja, "POSTUPCI KALJENJA ČELIKA", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:817790

Metadata
TitlePOSTUPCI KALJENJA ČELIKA
Title (english)QUENCHING OF STEELS
AuthorMarin Pršlja
MentorAndrijana Milinović (mentor)
Committee memberAndrijana Milinović (član povjerenstva)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberIvan Opačak (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-10, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema ovoga rada je toplinska obrada čelika postupkom kaljenja. Na početku ovoga rada je ukratko objašnjen opći dijagram toplinske obrade te njegove faze. Dalje u radu detaljnije je opisan postupak kaljenja sa svim njegovim fazama, objašnjen je izbor parametara postupka kaljenja, dana su sredstva za hlađenje te objašnjeni načini hlađenja. Na kraju teorijskog dijela ukratko su objašnjeni pojmovi kaljivost, zakaljivost i prokaljivost te su spomenuti postupci kaljenja čelika i ukratko je svaki od njih objašnjen. U eksperimentalnom dijelu rada provedeno je kaljenje na uzorku izrađenom od čelika C45. Potrebno je pripremiti ispitni uzorak, ispitati njegovu tvrdoću i mikrostrukturu prije kaljenja, kaljenje ispitnog uzorka, ispitivanje tvrdoće i mikrostrukture nakon kaljenja te analiza rezultata ispitivanja prije i poslije kaljenja.
Abstract (english)
The topic of this paper is the heat treatment of steel by the process of hardening. At the beginning of this paper, a general diagram of the heat treatment and its phases are briefly explained. Further in the paper, the process of hardening with all its phases is described in more detail. The selection of the parameters of the hardening process is explained, cooling agents are given and the cooling modes are explained. At the end of the theoretical part, the concepts of hardenability are briefly explained, and the processes of quenching of steels are mentioned and briefly each of them is explained. In the experimental part, the process of hardening was carried out on the sample made of C45 steel. It is necessary to prepare the test sample, examine its hardness and microstructure prior to hardening, and then after the process of hardening the same tests of hardness and microstructure are done on the test sample. After all tests are done, results of analysis are given and compared with each other.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:817790
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-11 11:52:32