prikaz prve stranice dokumenta OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI
Access restricted to students and staff of home institution
master's thesis
OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:853990
Metikoš, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Metikoš, M. (2019). OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:853990

Metikoš, Marko. "OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:853990

Metikoš, Marko. "OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:853990

Metikoš, M. (2019). 'OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:853990

Metikoš M. OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:853990

M. Metikoš, "OPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:853990

Metadata
TitleOPTIMIZACIJA PROIZVODNIH PROCESA U ODABRANOJ TVRTKI
Title (english)OPTIMIZATION OF PRODUCTION PROCESS
AuthorMarko Metikoš
MentorLeon Maglić (mentor)
Committee memberLeon Maglić (član povjerenstva)
Committee memberDaniel Novoselović (predsjednik povjerenstva)
Committee memberStjepan Aračić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu je opisana podesiva vlačna opruga koja se ugrađuje na traktorsku kosilicu s diskovima. Opruga služi za podešavanje optimalnog pritiska kosilice na tlo. Podesiva vlačna opruga je sklop koji se sastoji od više pozicija. U uvodu je opisana povijest tvrtke POD d.o.o., ukratko je rečeno čemu služi proizvod koji se proizvodi u navedenoj tvrtki i gdje se ugrađuje. U drugom poglavlju je opisan proizvod sa svim pozicijama i podsklopovima. U trećem poglavlju je napravljena analiza troškova za svaku poziciju, podsklop i za sklop. Analiza troškova je napravljena za postojeću tehnologiju u tvrtki. Prikazane su sastavnice, proizvodni postupci i napravljen je proračun standardnog troška. Standardni trošak je cijena zaduživanja na skladište. U četvrtom poglavlju je napravljena analiza troškova za slučaj proizvodnje određenih pozicija na CNC tokarskom stroju koji je nedavno kupljen. Te pozicije su se ranije slale kooperantu na vanjsku uslugu strojne obrade. Određeno je optimalno rješenje za proizvodnju podesive vlačne opruge.
Abstract (english)
This paper describes an adjustable extension spring that mounts on a tractor lawn mower with discs. This spring is used to adjust the optimum pressure the lawn mower has on the ground. Adjustable spring is a multi- position assembly. The introduction describes the history of the POD d.o.o. company. It is also explained where the adjustable spring is used. The second chapter describes a product with all positions and sub-assemblies. In the third chapter, cost analysis was performed for each position, sub-assembly and assembly. Cost analysis is made for company’s existing technology. The components, production processes and the standard cost calculations are presented where standard cost represents the price at which the product enters the warehouse. In the fourth chapter, a cost analysis was performed for the production of certain positions on the CNC lathe machine recently bought by the company. These positions were previously sent to the cooperator on the external machining service. An optimal solution for the production of adjustable spring was determined.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:853990
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-16 12:53:24