prikaz prve stranice dokumenta UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA
Access restricted to students and staff of home institution
master's thesis
UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:238270
Barna, Mario
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Barna, M. (2019). UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:238270

Barna, Mario. "UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:238270

Barna, Mario. "UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:238270

Barna, M. (2019). 'UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 16 June 2024, https://urn.nsk.hr/urn:nbn:hr:153:238270

Barna M. UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 June 16] Available at: https://urn.nsk.hr/urn:nbn:hr:153:238270

M. Barna, "UTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:238270

Metadata
TitleUTJECAJ SVOJSTAVA SUBSTRATA NA ČVRSTOĆU LIJEPLJENOG SPOJA
Title (english)INFLUENCE OF SUBSTRAT PARAMETERS ON STRENGTH OF BONDED JOINT
AuthorMario Barna
MentorJosip Stojšić (mentor)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberJosip Cumin (predsjednik povjerenstva)
Committee memberPero Raos (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-18, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu je opisan postupak spajanja materijala lijepljenjem kroz tri cjeline. Prva cjelina rada se temelji na teorijskom opisu postupka lijepljenja, izboru ljepila, podjele ljepila i primjerima iz prakse. Druga cjelina rada detaljno opisuje utjecaj pojedinih parametara na čvrstoću lijepljenog spoja. Parametri kao što su: svojstva ljepila, svojstva materijala za lijepljenje, uvjeti opterećenja, postupak lijepljenja i konstrukcijsko oblikovanje spoja, stvaraju niz karika u lancu za pouzdani lijepljeni spoj. Treća cjelina rada sastoji se od eksperimentalnog dijela. Cilj eksperimentalnog dijela rada je utvrditi ovisnost hrapavosti površine na mehanička svojstva lijepljenog spoja. Za ispitivanje, korišteni su aluminijska ispitna tijela po normi ISO 4587, te dvije vrste ljepila. Duljina preklopa kod svih ispitnih tijela je konstantna, dok je hrapavost površine mijenjana. Rezultati ispitivanja pokazuju da postoji ovisnost hrapavosti površine o mehaničkim svojstvima lijepljenih spojeva kod određenih vrsta ljepila.
Abstract (english)
In this graduate thesis, the method of material compound with glue bonding has been described through the three chapters. The first chapter of the work is based on the theoretical description procedure of bonding, glue selection, glues classification and examples from practice. The second chapter of work described in detail the influence some parameters on the strength of the glued compound. Parameters such as: glue properties, material properties for bonding, load conditions, bonding procedure and constructional design of the compound, create a series of links in the chain for a reliable glue bonded compound. The third chapter of work consists of an experimental part. The aim of the experimental part of the paper is determining surface roughness dependence on the mechanical properties of the glue bond. For testing, aluminum test specimens were made according to norm ISO 4587 and two types of glues were used. The length of overlap in all test samples was constant, while the roughness of the surface varies. The test results show that addictional exist surface roughness of the mechanical properties of glued compounds at certain types of glues.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:238270
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-24 08:59:09