prikaz prve stranice dokumenta Postupci obrade tokarenjem
Access restricted to students and staff of home institution
undergraduate thesis
Postupci obrade tokarenjem
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:568821
Medaković, Janja
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Medaković, J. (2019). Postupci obrade tokarenjem (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:568821

Medaković, Janja. "Postupci obrade tokarenjem." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:568821

Medaković, Janja. "Postupci obrade tokarenjem." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:568821

Medaković, J. (2019). 'Postupci obrade tokarenjem', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 24 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:568821

Medaković J. Postupci obrade tokarenjem [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 November 24] Available at: https://urn.nsk.hr/urn:nbn:hr:153:568821

J. Medaković, "Postupci obrade tokarenjem", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:568821

Metadata
TitlePostupci obrade tokarenjem
Title (english)Turning processes
AuthorJanja Medaković
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-20, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu se kroz nekoliko poglavlja opisuju postupci obrade tokarenjem, bez eksperimentalnih ispitivanja. U nastavku su opisane geometrijske značajke dobivene pojedinim postupkom tokarenjem, kvaliteta površine, rezni alati, te izvedbe tokarilica. U prvom poglavlju opisan je općeniti uvod o tokarenju. Prikazana je podjela postupaka obrade tokarenjem kao i parametri obrade, te kinematika postupaka obrade tokarenjem. Cilj svake proizvodnje je dobiti točan i kvalitetan proizvod, stoga su u drugom poglavlju objašnjene metode određivanja hrapavosti i kvaliteta obrađene površine. Prikazane su i vrijednosti koje se postižu tokarenjem, te neki instrumenti za ispitivanje hrapavosti površine. Kako alati i strojevi imaju najvažniju ulogu u procesu izrade, u zadnjem poglavlju detaljno su opisani rezni alati i izvedbe tokarskih strojeva. Prikazana je geometrija reznih alata, te materijali za izradu alata i naprave za prihvat i stezanje obradaka, što ima veliki utjecaj na kvalitetu samog proizvoda. U nastavku su opisane različite izvedbe tokarilica, njezine prednosti i nedostaci, kao i primjena.
Abstract (english)
This work describes the processing methods of turning, without experimental testing. Through several chapters you will find descriptions of geometric features obtained by the individual turning operations, surface quality, cutting tools, and lathe construction. The first chapter describes the general introduction to turning. There is presented the division of the bypass processing as well as the processing parameters and the kinematics of turning processes. The goal of every production is to obtain the correct and high-quality product, therefore, in the second chapter, the methods of determining the roughness and quality of the treated surface are explained. The values that are obtained by turning are also shown, as well as some surface roughness testers. As tools and machines have the most important role in the manufacturing process, the last chapter describes the cutting tools and the performance of lathe machines. The geometry of the cutting tools, tool materials and devices for attachment and clamping are shown, which has a great influence on the quality of the product itself. Finally, different lathe performance, its advantages, and disadvantages as well as its application, are described.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:568821
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-27 06:07:21