prikaz prve stranice dokumenta KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019
Access restricted to students and staff of home institution
master's thesis
KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:324880
Tvrdy, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Tvrdy, T. (2019). KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:324880

Tvrdy, Tomislav. "KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:324880

Tvrdy, Tomislav. "KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:324880

Tvrdy, T. (2019). 'KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 01 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:324880

Tvrdy T. KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 December 01] Available at: https://urn.nsk.hr/urn:nbn:hr:153:324880

T. Tvrdy, "KONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:324880

Metadata
TitleKONSTRUIRANJE ALATA ZA PUHANJE PROIZVODA PREMA CRTEŽU PPM2/2019
Title (english)BLOWN MOLD DESIGN FOR PRODUCT ACCORDING DRAWING NUMBER PPM2/2019
AuthorTomislav Tvrdy
MentorJosip Stojšić (mentor)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberDaniel Novoselović (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu opisani su polimerni materijali, njihova podjela te fizička stanja. Opisani su postupci puhanja polimernih materijala, te kalupi za puhanje polimera i dijelovi kalupa koji se koriste kod tehnologije puhanja. Detaljno je opisano konstruiranje te izrada alata za puhanje, korišteni materijali za izradu te materijali za puhanje proizvoda. Konstrukcija je obavljena u programskom softveru SIEMENS NX8 te je prikazana detaljna izrada programa odabir parametara i dobivanje NC koda za obradni centar DOOSANDNM 5700.
Abstract (english)
In these master thesis polymer materials, their division and physical properties were described. Methods of blowing of polymeric materials and mold parts, which are used in blowing technology were described to. In detail were described construction and manufacturing of blow molding tools, used materials for manufacturing and materials for the blowing. The construction was carried out in SIEMENS NX8 software program and there is demonstrated detail program development, selection of parameters and getting NC code for machining center DOOSAN DNM 5700.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:324880
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-27 08:06:11