prikaz prve stranice dokumenta DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE
Access restricted to students and staff of home institution
master's thesis
DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. urn:nbn:hr:153:735558
Perak, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Perak, T. (2019). DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:735558

Perak, Tomislav. "DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:735558

Perak, Tomislav. "DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2019. https://urn.nsk.hr/urn:nbn:hr:153:735558

Perak, T. (2019). 'DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 06 September 2024, https://urn.nsk.hr/urn:nbn:hr:153:735558

Perak T. DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2019 [cited 2024 September 06] Available at: https://urn.nsk.hr/urn:nbn:hr:153:735558

T. Perak, "DIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2019. Available at: https://urn.nsk.hr/urn:nbn:hr:153:735558

Metadata
TitleDIMENZIONIRANJE SHELL AND TUBE IZMJENJIVAČA TOPLINE
Title (english)SIZING OF SHELL AND TUBE HEAT EXCHANGER
AuthorTomislav Perak
MentorMarija Živić (mentor)
Committee memberMarija Živić (član povjerenstva)
Committee memberMarinko Stojkov (predsjednik povjerenstva)
Committee memberAnte Čikić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2019-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je provedeno dimenzioniranje unutrašnjosti izmjenjivača topline, tipa „shell and tube“, analitički. U prvom dijelu rada iznesene su osnovne smjernice o izmjenjivačima topline, kako bi se dobio uvid u način rada, vrste i primjenu izmjenjivača topline. Zatim je na osnovu ulaznih podataka napravljen termodinamički proračun unutrašnjosti izmjenjivača topline, koji će kasnije poslužiti za numeričku simulaciju. Izmjenjivač ima funkciju zagrijača vode, pa je radni medij u cijevima kao i na strani plašta, voda. Nadalje, u radu je opisan numerički pristup rješavanja, te je izrađen 3D model unutrašnjosti izmjenjivača topline. Na modelu je generirana geometrijska mreža, te su provedene numeričke simulacije u softverskom paketu Ansys Fluent 18.1. Iz rezultata simulacije, odnosno polja temperature može se zaključiti da je izvedba ovakvog izmjenjivača topline u praksi moguća, te bi on u cijelosti obavljao funkciju za koju je namijenjen.
Abstract (english)
In this work the sizing of the core of "shell and tube" heat exchanger is performed, analitically. In the first part of the work the basic guidelines heat exchangers were presented, in order to gain insight into the mode of operation, the type and the application of the heat exchanger. Then, based on input data, a thermodynamic calculation of the heat transfer in the core of the heat exchanger was made, and the results are used in the numerical simulation. The heat exchanger is water heater, so the working medium is water inside of the tubes as well as on the side of the shell. Furthermore, the numerical approach to solving the problem is described and a 3D model of the exchanger's interior is created. The geometric grid is created in the CAD model and a mathematical model is solved numerically by using CFD software. Numerical simulation was performed in the Ansys Fluent 18.1 software package. From the simulation results, respectively, the temperature field it can be concluded that the performance of such heat exchanger is practicable and that it would fully perform the function for which it is intended.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:735558
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Power Engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2019-09-27 08:52:38